- The Red Jacket
The clipper ship that made the fastest trip across the Atlantic ever made under sail. Her record from Sandy Hook to Rock Light was thirteen days, one hour. - A Large Egyptian Ship of the 18th Dynasty
The overhanging bow and stern were common on most early Egyptian ships, and the heavy cable, stretched from one end of the hull to the other and supported on two crutches, was used to strengthen these overhanging ends. - A British East Indiaman
These merchant ships, which sailed from England to the Far East, were almost as much like warships as they were like merchantmen. They were finely built, but they took their time on their voyages out and back. - A 16th-Century Dutch Boat
It was on boats of this type that the jib seems first to have been used. To-day in Holland one sees a similar boat, called a schuyl, which is almost identical with this, except that it utilizes a curved gaff at the top of the mainsail. - A Corvette of 1780
This ship shows the new sail plan overcoming the old. The masts carry topsails, topgallantsails, and royals, and what was formerly a lateen sail on the mizzenmast has become a spanker. Furthermore, while the ship carries jibs, she has not yet parted with her spritsails. - An American Coasting Schooner
Square-rigged ships have largely disappeared because, among other things, their crews were large. These schooners, which sometimes have four or five masts, can be handled by small crews and consequently are able to continue to vie with steam. - The Ariel, 1866
Which, with the Fiery Cross, Taeping, Serica, and Taitsing, sailed what was, perhaps, the greatest race ever run. After sailing 16,000 miles from Foo-Chow, China, to London, the Ariel, Taeping, and Serica docked in London on the same tide, the Taeping the winner by only a few minutes. The other two were only two days behind, although the first three took 99 days. - The Great Republic
The greatest clipper ship ever built. Unfortunately, before she made her first voyage she caught fire and had to be sunk. She was refloated and refitted, but never made a voyage in her original rig. When new masts were put in her they were made smaller than the first ones. Still she turned out to be one of the very fastest of the clippers. - The Great Britain
An awkward and unsuccessful ship. She proved, however, when she was wrecked, that for ship construction iron is stronger than wood, and proved, too, that double bottoms, bulkheads, and bilge keels, which were new departures when she was built, were most desirable in ships of her size. - The Steamship Oceanic
This ship may be said to be the first of the transatlantic liners, for in her, for the first time, great concessions were made for the comfort and convenience of the passengers. - The Savannah
The first steamship to cross the Atlantic. - 'Great Republic'
Last of the Clipper Passenger Packets, 1854. The clipper “packet ship” was a vast improvement on the ordinary sailing ship. It had just reached its highest point of development when the ocean steamship first made its appearance. It was to the upper strata of the travelling community, sixty years ago, the counterpart of the express steamer of to-day. The packet-ship was built for fast sailing, with very fine lines, was handsomely fitted up and furnished, was exceedingly well found in eatables and drinkables, and carried a great spread of canvas. To see one of these ships under full sail was a [Pg 27]sight to be remembered—a rare sight, inasmuch as all the conditions of wind and water necessary for the display of every stitch of canvas are seldom met with in the North Atlantic. They not unfrequently crossed in fourteen or fifteen days. In winter they might be three months on a single voyage, but their average would be from twenty-five to thirty days. - The Santa Maria, the Niña and the Pinta
The Santa Maria, the Niña and the Pinta The most famous ships that ever sailed the seas The Niña, shown in the foreground, was the smallest of the three, but in her Columbus returned to Spain after the Santa Maria was wrecked, and the captain of the Pinta seemed tempted to prove unfaithful. - C. P. R. grain elevator at Fort William, Ontario
The farmer sells his crop of wheat to the grain-dealer, and carts it, say, to Brandon, where the purchaser takes delivery of it at his elevator. Let us examine this thing somewhat minutely, taking by way of illustration one of the elevators belonging to the Canadian Pacific Railway Company at Montreal. It is a medium-sized one, having capacity for storing about 600,000 bushels of grain. The same company’s elevators at Fort William and Port Arthur are much larger, having capacity for 1,500,000 bushels. In Chicago and Buffalo there are elevators of three millions of bushels capacity; but, whether larger or smaller, in their main features they are all alike. The elevator is a wooden structure of great strength. Its massive stone foundations rest on piles imbedded in concrete. The framework is so thoroughly braced and bolted together as to give it the rigidity of a solid cube, enabling it to resist the enormous pressure to which it is subjected when filled with 18,000 tons of wheat. The building is 210 feet long, 80 feet wide, and 142 feet in height from basement to the peak of the roof. Including the steam-engine (built at the C. P. R. works) of 240 horse-power, the entire cost of this elevator was $150,000. It consists of three distinct compartments—for receiving, storing, and delivering grain. On the ground floor are two lines of rails by which the cars have ingress and egress. The general appearance of this flat is that of a bewildering array of ponderous posts and beams, shafting, cog-wheels, pulleys and belts, blocks and tackle, chutes, and the windlasses for hauling in and out the cars, for a locomotive with its dangerous sparks may not cross the threshold. Beneath this, in the basement, are the receiving tanks, thirty-five feet apart from centre to centre, corresponding to the length of the cars. Of these there are nine, enabling that number of cars to be simultaneously unloaded. This is quickly done by a shovel worked by machinery, with the aid of two men, the grain falling through an iron grating in the floor into the tank. The elevator has nine “legs.” The leg is an upright box, 12 inches by 24 inches, extending from the bottom of the tank to the top of the building; inside of it is a revolving belt with buckets attached 15½ inches apart. The belt is 256 feet long, and as it makes 36 revolutions per minute, each bucket containing one-third of a bushel, each leg is able to raise 5,250 bushels per hour. A car is unloaded and its contents hoisted into the upper regions in fifteen minutes. When all the legs are at work 30,000 bushels are handled in an hour.