Mississippi steamboat ‘J. M. White,’ 1878
The light-draught Mississippi steamers bear little resemblance to the Hudson River and Long Island Sound boats while the American steam ferry-boat is a thing certainly not of beauty, but unique. The J. M. White, of 1878, was deemed “a crowning effort in steamboat architecture in the West.” She was 320 feet long and 91 feet in width, over the guards. Her saloons were magnificently furnished, and all her internal fittings of the most elaborate description. She carried 7,000 bales of cotton and had accommodation for 350 cabinpassengers. Her cost was $300,000. She was totally destroyed by fire in 1886.
Fulton’s ‘Clermont’ on The Hudson, 1807
The Clermont made her first voyage from New York to Albany, August 7th, 1807. Her speed was about five miles an hour. During the winter of 1807-8 she was enlarged, her name being then changed to North River. She continued to ply successfully on the Hudson as a passenger boat for a number of years, her owners having acquired the exclusive right to navigate the waters of the State of New York by steam.
'Wilhelm Kaiser' On The Rhine, 1886
The Rhine steamers and those plying on the Swiss lakes are in keeping with the picturesque scenery through which they run. Painted in bright colours, they present a very attractive and smart appearance. They are kept scrupulously clean and are admirably managed. Many of them are large, with saloon cabins the whole length of the vessel, over which is the promenade deck covered with gay awnings. They run fast. The captain sits in state in his easy chair under a canopy on the bridge—smoking his cigar. The chief steward, next to the captain by far the most important personage on board, moves about all day long in full evening dress—his main concern being to know what wine you will have for lunch or dinner that he may put it on ice for you. The table d’hote is the crowning event of the day on board a Rhine steamer, i.e., for the misguided majority of tourists to whom a swell dinner offers greater attractions than the finest scenery imaginable.
“Columba,” famous Clyde river steamer, 1875
Fifty years later witnessed the full development of Mr. Bell’s ideal in the Columba, then as now the largest river steamer ever seen on the Clyde, and the swiftest. The Columba is built of steel, is 316 feet long and 50 feet wide. She has two oscillating engines of 220 horse-power, and attains a speed of twenty-two miles an hour. Her route is from Glasgow to Ardrishaig and back, daily in summer, when she carries from 2,000 to 3,000 persons through some of the finest scenery in Scotland. She is provided with steam machinery for steering and warping her into the piers, and with other modern appliances that make her as handy as a steam yacht. She resembles a little floating town, with shops and post-office where you can procure money orders and despatch telegrams And what is the Columba after all but an enlarged and perfected reproduction of Bell’s Comet!
Bell’s ‘Comet,’ off Dumbarton on the Clyde, 1812
Nothing more was heard of the steamboat in Britain until 1812, when Henry Bell surprised the natives of Strathclyde by the following advertisement in the Greenock Advertiser: STEAM PASSAGE BOAT, “THE COMET,” Between Glasgow, Greenock and Helensburgh, for Passengers Only. The subscriber having, at much expense, fitted up a handsome vessel, to ply upon the River Clyde, between Glasgow and Greenock, to sail by the power of wind, air and steam, he intends that the vessel shall leave the Broomielaw on Tuesdays, Thursdays and Saturdays, about mid-day, or at such hour thereafter as may answer from the state of the tide; and to leave Greenock on Mondays, Wednesdays and Fridays, in the morning, to suit the tide. The elegance, comfort, safety and speed of this vessel requires only to be proved to meet the approbation of the public; and the proprietor is determined to do everything in his power to merit public encouragement. The terms are, for the present, fixed at 4s. for the best cabin, and 3s. for the second; but beyond these rates nothing is to be allowed to servants, or any other person employed about the vessel. The subscriber continues his establishment at Helensburgh Baths, the same as for years past, and a vessel will be in readiness to convey passengers to the Comet from Greenock to Helensburgh. Henry Bell. Helensburgh Baths, 5th August, 1812.
Symington’s ‘Charlotte Dundas,’ 1802
In 1801 the London newspapers contained the announcement that an experiment had taken place on the Thames, on July 1st, for the purpose of propelling a laden barge, or other craft, against the tide, by means of a steam-engine of a very simple construction. “The moment the engine was set to work the barge was brought about, answering her helm quickly, and she made way against a strong current, at the rate of two and a half miles an hour.” In 1802 a new vessel was built expressly for steam navigation, on the Forth and Clyde Canal, under Symington’s supervision, the Charlotte Dundas, which was minutely inspected on the same day by Robert Fulton, of New York, and Henry Bell, of Glasgow, both of whom took sketches of the machinery to good purpose. This boat drew a load of seventy tons, at a speed of three and a half miles an hour, against a strong gale of wind. Under ordinary conditions she made six miles an hour, but her admitted success was cut short by the Canal Trust, who alleged that the wash of the steamer would destroy the embankment.
Miller’s twin boat on Loch Dalswinton, 1788
An experiment was made by Patrick Miller, a banker in Edinburgh, aided by Mr. Taylor, tutor in his family, and Alexander Symington, a practical engineer. Mr. Miller had a boat built and fitted with a small steam-engine, for his amusement, on Dalswinton Loch, Dumfriesshire. It was a twin-boat, the engine being placed on one side, the boiler on the other, and the paddle-wheel in the centre. It was launched in October, 1788, and attained a speed of five miles an hour. The engine, of one horse-power, is still to be seen in the Andersonian Museum, in Glasgow. Encouraged by his experiment, Mr. Miller bought one of the boats used on the Forth and Clyde Canal, and had a steam-engine constructed for it by the Carron Ironworks Company, under Symington’s superintendence. On December 26th, 1789, this steamboat towed a heavy load on the canal, at a speed of seven miles an hour; but, strange to say, the experiment was dropped as soon as it was tried.