- English one-wheeled Velocipede
We present an engraving of an English one-wheeled velocipede. The feet are placed on short stilts, connected with the cranks, one on either side of the rim, while the rider sits upon a steel spring saddle over the whole wheel. The inventor modestly limits the diameter of the wheel to twelve feet, and the number of revolutions to fifty per minute. Twenty-five miles per hour is the speed expected to be reached. The riders of this machine, without the ability to overcome the laws of gravity, would be very likely to get broken bones and noses. It is not likely to come into general use. - Flying Yankee Velocipede
HEMMING'S UNICYCLE, or "FLYING YANKEE VELOCIPEDE." The single-wheeled velocipede has at length received a palpable body, and " a local habitation and a name." Richard C. Hemming of New Haven, Conn., invented the machine herewith represented, two years ago; but has only recently brought it into the market and applied it to practical purposes.. The main wheel has a double rim, or has two concentric rims, the inner face of the inner one having a projecting lip for keeping the friction rollers and the friction driver in place; each of these being correspondingly grooved on their peripheries. The frame on which the rider sits, sustains these friction wheels in double parallel arms, on the front one of which is mounted a double pulley, with belts passing to small pulleys on the axis of the driving wheel. This double wheel driven, as seen, by cranks turned by the hands. The friction of the lower wheel on the surface of the inner rim of the main wheel is the immediate means of propulsion. A small binding wheel, seen between the rider's legs, serves to keep the bands or belts tight. The steering is effected either by inclining the body to one side or the other, or by the foot impinging on the ground, the stirrups being hung low for this purpose. By throwing the weight on these stirrups, the binding wheel may be brought more powerfully down on the belts. Over the rider's head is an awning, and there is also a shield in front of his body to keep the clothes from being soiled by mud and wet. When going forward, the driving wheel is kept slightly forward of the centre of gravity by the position of the rider. By this means the power exerted is comparatively small. Every turn of the crank is equivalent to a rotation of the great wheel. Mr. Hemming says that this machine can be manufactured for fifty dollars, of a weight of only thirty pounds;- that it will ascend steep grades, and that it can be driven on the roads with but little exertion, at the rate of twenty or even twenty-five miles an hour. This wheel is of a diameter of from six to eight feet. Mr. Hemming's boy of thirteen has one five feet in diameter, the first manufactured, crude in construction, and heavier than necessary, which he propels at the rate of a mile in three minutes. - Callihan's Velocipede
This velocipede was patented January 5th, 1869. It has been thoroughly tested and is pronounced a complete success. It will be seen that it is very different from Bradford's machine. The front wheels are used as guiding wheels, the rear as the driving ones. It is propelled by both hands and feet, acting together or separately. The propelling power is almost unlimited, and is furnished by cranks in the hind axles, with lever attachments. It has three different steering arrangements, either of which can be applied, according to the taste of the purchaser. In all these, the forward wheel and axle are turned with a lever arrangement, operated upon by the band. The machine develops both chest and limbs, and can be readily used by ladies and children. A little girl of six years has ridden it for an hour without fatigue. It is so constructed, that scruples of delicacy need prevent no lady from driving it. It can be driven either backwards or forwards, will run upon the road, at the rate of fifteen miles an hour, and will ascend any ordinary hill with ease. It is claimed, that it is the only machine made that can be checked in going down hill, or that can be stopped instantly. The machine varies in size and weight. That most in favor, has a wheel of three feet and a half in diameter, and a weight of about one hundred pounds. It is constructed of the best material, and is neat and nobby in appearance. Its price is $125. - Bradford's Velocipede
If any of our readers desire the luxury of a ride on a velocipede without the necessity of taking lessons, or the danger of getting a fall, they will find " Bradford's Four-Wheeled Velocipede" ready and able to afford them the pleasure. The inventor of this vehicle, Mr. C. K. Bradford, has devoted the greater part of the last five years to experiments upon the velocipede, and took out his first patent three years and a half ago. The machine, as now constructed and improved, obtained its American patent October 13th, 1868. It has since been patented in England, France, and Belgium. It is made of the best material, and finished like a gentleman's trotting wagon. It weighs but sixty-five pounds, and combines in a high degree both lightness and strength. Any man, woman or child, can learn to guide it easily with but a few moments practice. The inventor claims that it is able to maintain a speed of a mile in three minutes, and that the extraordinary time of a half mile in one minute and forty-five seconds, has been made upon a country road. It can be driven by almost any man, at the rate of a mile in four minutes, on almost any road, without greater exertion than is ordinarily used in walking. This velocipede, unlike all others, is seen to best advantage on the street. In Mr. Bradford's tasteful little curricle, the rider can sit at ease as carelessly as in a carriage, giving himself up wholly to the exhilaration of the rapid movement, and the pleasurable exercise of the muscles, which is just enough to make the machine skim over the ground, and give an enjoyable sense of power. The increase of friction, which would naturally result from the additional number of wheels, is prevented by an application of anti-friction rollers, which reduce the labor of propelling the machine to a minimum, a requisite of the highest importance to a person seeking either recreation or utility. - Pickering's American Velocipede
As will be seen from the accompanying engraving, "Pickering's American Velocipede," manufactured by Messrs. Pickering & Davis, differs very materially from the French model, so generally used by other manufacturers. It is claimed that it is more simple and durable, lighter and stronger. The reach or frame of this velocipede is made of hydraulic tubing. The gun-metal bearings are so attached that, when worn, they may be replaced by others, which are interchangeable like the parts of sewing-machines and fire-arms. The axle is so constructed as to constitute, in itself, an oil box. It is made tubular, and closed at either end with a screw, on the removal of which it is filled with lard oil. Cotton lamp-wick is placed loosely in the tubular axle and the oil is by this means fed to the bearing, as fast as required, through the small holes made for the purpose in the centre of the axle. The saddle is supported on a spiral spring, giving an elastic seat; it is brought well back, so that the rider maintains an erect position, and is adjustable to suit the length of limb of the rider. The tiller or steering handle is constructed with a spring so that the hands are relieved from the jolting that they would otherwise receive while running over rough ground. The stirrups or crank pedals, are three-sided, with circular flanges at each end, fitted to turn on the crank pins, so that the pressure of the foot will always bring one of the three sides into proper position. They are so shaped as to allow of the use of the forepart of the foot, bringing the ankle joint into play, relieving the knee, and rendering propulsion easier than when the shank of the foot alone is used. The connecting apparatus differs from that of the French vehicle in that the saddle bar serves only as a seat and brake, and is not attached to the rear wheel. By a simple pressure forward against the tiller, and a backward pressure against the tail of the saddle, the saddle spring is compressed, and the brake attached to it brought firmly down against the wheel. Messrs. Pickering & Davis have a large manufactory, and are the constant recipients of orders from all parts of the country. Mr. Pickering has always been a practical machinist, and personally superintends the structure of each machine turned out. - Construction of the Bicycle
The accompanying engraving will convey to the mind of the reader a correct idea of the French two-wheeled velocipede. The majority of makers in this country fashion their machine upon this pattern in every essential respect. We append a full technical description. A is the front wheel. This is the steering wheel, and upon its axis, the power is applied. B is the hind wheel; C, the treadles or foot-pieces ; D, the treadle cranks; E, slots in cranks, by which to adjust the foot-pieces and accommodate the length to the legs of the rider; F, bifurcated jaw, the lower part of which forms the bearing for the axle of the front wheel. From the upper part of this jaw, a rod or pivot extends, to which is attached the steering arm or handle F; G, the reach or perch, extending from the jaw of the front wheel to the rear or hind wheel. This reach is bifurcated, forming jaws for the hind wheel. H, " rests" on the front part of the reach. The rider puts one leg on the rest and works one of the cranks with the other leg while riding " side-saddle," or a leg may be placed upon each rest when the velocipede has acquired sufficient momentum, and the rider does not wish to keep his feet upon the treadles. I, the saddle or seat, which is adjustable on the seat-spring L, by the thumb-screw K. The seat-spring L, is attached at M to the reach G, which, at the other end, is fastened to the spring-struts N, that rise from the reach G; 0, the brake-lever, on the fulcrum P; Q,, the " shoe " of the brake that acts against the periphery of the hind wheel. The brake is operated by means of the cord S, one end of which is attached to the steering handle F, and the other end to the reach at 3. A cord passes from the steering handle under the pulley or roller 4, thence over the pulley 5, on the brake-lever 0, and from there to the point 3, where it is attached to the reach G. The brake is operated by giving a slight turning motion to the handle F, thus winding a small sheave upon the axis of the handle, and bring-ing the shoe Q, of the brake-lever 0, in contact with the surface of the wheel B. - Trappers at Old Faithful
Trappers at Old Faithful - Trapper type—American
The rendezvous of 1826 took place near Great Salt Lake. The turnover of furs was immense and, having made his fortune, General Ashley sold his interests to three of his most able employees, Jedediah Smith, David E. Jackson, and William Sublette. Smith left the rendezvous to lead a band southwest across the desert to the Spanish settlements of California, being the first to make this perilous passage. Jackson and Sublette headed for the Snake River country to trade with the Flatheads, taking a large force of trappers. - Trapper train in Teton Pass
Trapper train in Teton Pass - Rocky Mountain men setting traps
Rocky Mountain men setting traps - Rendezvous scene
At the Pierre’s Hole rendezvous, Drips and Vanderburgh, the American Fur Company partisans, were frustrated in their competitive effort by the fact that their supply train under Fontenelle had failed to arrive. It was now too late to bid for the furs taken out by Sublette, but they might follow Bridger and Fitzpatrick with profit if they only had trade goods. Accordingly, they resolved to hasten to Green River to see if they could find the belated caravan. - Powder Horn
Powder Horn - Marcus Whitman removing arrow from Jim Bridger
Marcus Whitman removing arrow from Jim Bridger - Keelboat up the Missouri
The extent of the wanderings of this trio is not known. In the spring of 1807 Colter alone paddled a canoe down the Missouri to the mouth of the Platte where he found keelboats of the Missouri Fur Company of St. Louis, led by Manuel Lisa. He was promptly recruited and went with this expedition up the Missouri and the Yellowstone to the 14mouth of the Bighorn River, where Lisa built a log fort known as Fort Raymond or Manuel’s Fort. - Jim Bridger
The remaining three expeditions were guided by James Bridger, who in 1843 had set up Fort Bridger on Black’s Fork of Green River, to cater to the emigrants who were beginning to follow the Oregon Trail. James Gemmell claims to have been among those present in 1846 when Bridger led “a trading expedition to the Crows and Sioux,” north up the Green River through Jackson’s Hole to West 78Thumb, making a tour of the “wonderful spouting springs” and other scenic features before continuing down the Yellowstone. E. S. Topping states that in 1850 Jim Bridger, Kit Carson, and twenty-two others on a prospecting trip out of St. Louis “crossed the mountains to the Yellowstone and down it to the lake and the falls; then across the Divide to the Madison River. They saw the geysers of the lower basin and named the river that drains them the Fire Hole.... The report of this party made quite a stir in St. Louis.” - Indian 'Buffalo Jump'—Yellowstone Valley
Indian “Buffalo Jump”—Yellowstone Valley. - Fort Hall
Three significant events occurred in connection with the rendezvous of 1834. (1) En route from St. Louis, Sublette and Campbell began the building of Fort Laramie (originally Fort William) on the North Platte. (2) Nathaniel Wyeth, embarking on a second venture, brought in trade goods which were not accepted, and so resorted to the establishment of Fort Hall near the junction of the Snake and Portneuf. The advent of these two fixed trading posts prophesied an end to the traditional rendezvous system. Also (3), at the rendezvous the partnership of the Rocky Mountain Fur Company was dissolved, Fraeb and Gervais selling out their interests. The remaining partners—Fitzpatrick, Bridger, and Milton Sublette—formed a new firm, but they made an agreement with Fontenelle which gave the American Fur Company a virtual monopoly of the Rocky Mountain fur trade. - Daniel T. Potts at the Bear Lake rendezvous of 1827
At the 1827 rendezvous at Bear Lake Jedediah Smith appeared like a ghost out of the Great Salt desert, reporting that the Spanish Governor of California had expelled him from that province. He arranged with his partners, Jackson and Sublette, to meet two years hence “at the head of Snake River.” Then, after a rest of only ten days, he summoned volunteers and again set his face toward the Pacific Ocean. In the winter of 1827-28, while Sublette attended to the business of getting supplies from St. Louis, Jackson sent fur brigades north from Bear Lake to the Snake River and its tributaries, where they came in frequent contact with the Hudson’s Bay Company trappers under Ogden. In 1828 the rendezvous was again Great Salt Lake, and again the trappers dispersed to hunting grounds on the Bear, the Snake, and the Green. - Bullet Mold
Bullet Mold - Beaver Trap
For a few years after Stuart’s party disappeared up Hoback Canyon, the Tetons and Jackson’s Hole were left in solitude. Due to the hostility of the Blackfeet, the loss of Astoria in the War of 1812, and the indifference of the Federal Government, American interest in the Western Fur trade suffered a relapse. British interests now took the initiative. In 1816 the Northwest Company, licensed by the Crown to trade in Oregon, put Donald McKenzie in charge of the Snake River division. From Fort Nez Perce at the mouth of the Walla Walla, he set forth in September of 1818 at the head of an expedition “composed of fifty-five men, of all denominations, 195 horses and 300 beaver traps, besides a considerable stock of merchandise.” - The Birmingham Mail near Aylesbury
- Bull and Mouth Road
- The Result of Feather-Edging
- The Holyhead and Chester Mails
- The Devonport Mail near Amsbury going post through a drift of snow
- The Mail's Meeting
- The Mail Coach
- The Stage Coach
- Duke of Beauforts's Drag
Duke of Beauforts's Drag - Under Carriage of Coach
- Section of First-rate Man-of-War
I will now give you a sectional division of a first-rate line-of-battle ship. Such a ship, carrying 120 or more guns, has four decks on which her guns are placed. The highest is open to the air, and is called the UPPER DECK At the after part, extending a little way beyond the mizen-mast, there is a raised platform, called the POOP. It has no guns on it. On the main deck is the steering-wheel, with the binnacle in front of it. The after part of this deck between the poop and the main-mast is called the quarter-deck, and is the place where the officers especially walk. The part under the poop is divided into cabins, appropriated to the use of the captain. Here, also, is a clerk's office and a pantry. Between the main and fore-mast the large boats are stowed, and on either side are the gangways at which sentries are stationed. The next deck under this is called the MAIN DECK. In the after part is the admiral's cabin. Immediately under the boats is a pen for the officers' live-stock ; and just abaft the fore-mast is the galley, or kitchen. The third deck from the upper is called the MIDDLE DECK. The after part is fitted up for the lieutenants, chaplain, surgeon, paymaster, marine officers, &c., and called the WARD-ROOM. In the fore part of the deck is placed the sick-bay, a compartment fitted up as a hospital ; about the centre of this deck is one of the capstans. The fourth from the upper is called the LOWER or GUN DECK. In the after part is the GUN-ROOM, where the midshipmen, and other junior officers, mess. The tiller of the rudder works through the gun-room just above their heads. A second capstan is placed on this deck ; and forward are the riding-bitts for securing the cables. It is the lowest deck on which guns are carried. The ORLOP DECK is the fifth deck from the upper. It has no guns or ports, though lighted up by bull's eyes or scuttles. In the after part is the purser's issue-room ; next to it is the after cockpit, where the midshipmen and other junior officers sleep in hammocks. Before it again will be found the sail-room, where the sails are kept, and the cable-tiers, where the cables are stowed. Before it again, just abaft the fore-mast, is the fore cockpit, and the warrant officers' cabins, while right in the head of the ship are the carpenter's and boatswain's stores. Low as we have got, we have still further to go down to the HOLD, which, if it may be so called, is the sixth deck from the highest. It is often divided into two decks for the greater convenience of stowage. Here are the FORE AND AFTER MAGAZINES, WATER TANKS, WINE AND SPIRIT ROOM, CHAIN CABLE LOCKERS, SHOT LOCKERS, BREAD ROOM, SHELL ROOM, GUNNER'S STORE ROOM, DRY PROVISION, and BEEF AND PORK IN CASKS. Since the introduction of auxiliary steam-power into ships of war, a large portion of the hold is devoted to the steam-engine and boilers, coal bunkers, and the shaft of the screw, while the funnel runs up through all the decks ; but it is wonderful, comparatively, how little space these are allowed to occupy, considering the great aid the steam-engine affords to the movements of the ship. - The 'Minotaur'
Launched in 1863 Among the numerous huge monsters constituting the iron-clad fleet of England, the Minotaur, is one of the most gigantic and formidable; and the sister ships, the Agincourt and Northumberland, all of precisely the same tonnage, power, rig, and equipment, are the largest and most powerful ships in the navy. The Minotaur was built at Blackwall, by the Thames Ship Building company and the engines were constructed by Messrs. Penn, of Deptford. She is 6,621 ton's measurement, and propelled by screw engins of 1,350 horsepower, with a speed of 15 knots an hour. She is 400 feet in length by 59 in width, and carries in all thirty-four of the heaviest guns used afloat. Among these which form her chief batter on the main deck are four 300-pounder Armstrongs. - Otaitai, or Porter's Basket
All this time the Otando people were busy making otaitais, or porters' baskets. The otaitai is a very ingenious contrivance for carrying loads in safety on the backs of men. I have brought one of these baskets home, and preserve it as a keepsake. It is long and narrow; the wicker-work is made of strips of a very tough climbing plant; the length is about two and a half feet, and the width nine inches ; the sides are made of open cane-work, capable of being expanded or drawn in, so as to admit of a larger or smaller load. Cords of are attached to the sides, for the purpose of securing the contents. Straps made of strong plaited rushes secure the basket to the head and arms of the carrier, as shown in the picture. - Fall of Table Rock
On the 25th of June, 1850, occurred the great downfall which reduced Table Rock to a narrow bench along the bank. The portion which fell was one immense solid rock two hundred feet long, sixty feet wide, and one hundred feet deep where it separated from the bank. The noise of the crash was heard like muffled thunder for miles around. Fortunately it fell at noonday, when but few people were out, and no lives were lost. The driver of an omnibus, who had taken off his horses for their midday feed, and was washing his vehicle, felt the preliminary cracking and escaped, the vehicle itself being plunged into the gulf below. - Excited man shouting
Excited man shouting - Men
Men - Gentleman smoking a cigar
Gentleman smoking a cigar - The Bowery night-scene
The Bowery night-scene - Man wringing his hands
Man wringing his hands in anticipation of making some money - Man
Man carrying a top hat - Patronizing stance
Man standing in a patronizing stance - Man smoking a cigar
Man smoking a cigar - Smiling and rubbing his hands
Man smiling and rubbing his hands - Man on the stage
Man on the stage - Man reading on stage
Man reading on stage - Man with money in his hand
Man looking at the money in his hand - Man looking up from his reading and smiling
Man looking up from his reading and smiling - Man shrugging
European man with hat in hand shrugging - A Lady
A Lady - Pleased to meet you
Pleased to meet you, man showing respect when greeting someone - Man walking
Man walking - Unhappy man with cigar
Unhappy man with cigar - Man in pub having a beer
Man in pub having a beer - Bartender looking at beer
Bartender looking at beer - Man cleaning his glasses with a handkerchief
Man cleaning his glasses with a handkerchief - The Butler
- A blacksmith
- Gentleman explaining
Gentleman explaining - How do you do
- Man watching girl aleep in bed