- Holding the bow
- Position of the left hand and the left arm
The violin is held with the left hand and rests on the left collar bone. The instrument must be horizontal. To give a firm grip, a small pad is often placed between the violin and the left shoulder. A chin-rest screwed to the ribs, and covering a part of the upper table, is also to be recommended. The chin-rest serves also to protect the varnish. To prove that the violin is held securely and well, the left hand may be removed. - Constituent parts of the violin - Exterior
The most important part is the upper table or belly (a). The other parts are the ribs or sides (b), the back (c), the neck (d), the head comprising the scroll and peg box (e), the pegs (f), the finger board (g), the bridge (h), the tailpiece (i), the button[3] (k), the nut (l), and the f or sound-holes (m). The interior of the violin contains the soundpost and the bass bar. - Rabab
. Rabab—Arabian bowed instrument (of Persian origin). Pictures of Indian and Persian bowed instruments exist, but the period when they were employed is not exactly known. - Raba—Indian violin
Pictures of Indian and Persian bowed instruments exist, but the period when they were employed is not exactly known. - Constituent parts of the bow
- Constituent parts of the violin - Interior
- The bow
This received its name from its ancient form, which has undergone many alterations before the present form was arrived at - Harp
- Action of the Square Piano
A. Action Frame. B's Indicate the Cushions, or Bushing, of felt, cloth or leather. C. Balance Rail. D. Balance Pin. Round. E. Mortised Cap for Balance Pin. Bushed. F. Key. G. Lead. H. Back Check. I. Bottom or Key Rocker. J. Bottom Screws; used to regulate height of Jack. K. Jack. L. Jack Spring; concealed under Bottom. M. Center Pin to Jack. N. Hammer Rail. O. Regulating Screw. P. Regulating Button. Q. Flange Rail. R. Flange. Split. S. Flange Rail Screw. T. Flange Screw, to regulate jaws of flange. U. Hammer Butt. V. Center Pin. W. Hammer Stem or Shank. X. Hammer Head. Y. Hammer Felt. Treble hammers sometimes capped with buckskin in old instruments. - Action of the Grand Piano
1. Indicates the felt, cloth or leather, upon which the various parts of the action rest, or fall noiselessly. 2. Key. 3. Bottom; sometimes called Key Rocker. 4. Extension; split at lower end to receive center pin in Bottom. 5. Wippen Support. 6. Jack. 7. Jack Spring. 8. Flange and Regulating Rail. 9. Regulating Screw, Button and Cushion. 10. Escapement Lever. 11. Regulating Screw in Hammer Flange, for Escapement Lever. 12. Check Wire, for Escapement Lever. 13. Screw to regulate fall of Escapement Lever. 14. Lever Flange, screwed to Flange Rail. 15. Hammer Shank. 16. Hammer. 17. Back Check. 18. Damper Lever, leaded. 19. Damper Wire, screwed into upright. 20. Damper Wire Guide, fastened to Sound-Board. 21. Damper Head and Felt. 0. Center Pins. Holes lined with Bushing Cloth. - Upright Piano Action
Ky, is the Key in its resting position. c, wherever found, represents a cushion of felt or soft leather upon which the different parts of the action rest or come in contact with each other. Their purpose, as is readily seen, is that of rendering the action noiseless and easy of operation. Bnc R, shows the end of the balance rail, extending the entire length of the keyboard. B P, is the balance pin. This is a perfectly round pin driven firmly in the balance rail. The bottom of the hole in the key fits closely around the balance pin; at the top, it is the shape of a mortise, parallel with the key, which allows the key to move only in the direction intended. The mortise in the wooden cap on top of the key at this point is lined with bushing cloth which holds the key in position laterally, and prevents looseness and rattling, yet allows the key to move easily. - Piano
- Cornemuse, Calabrian Bagpipe, Musette
The Calabrian Bagpipe or Zampogna is a rudely carved instrument of the eighteenth century. It has four drones attached to one stock, hanging downwards from the end of the bag: two of them are furnished with finger-holes. The reeds are double like those of the oboe and bassoon. The bag is large; it is inflated by the mouth and pressed by the left arm against the chest of the performer. The Zampogna is chiefly used as an accompaniment to a small reed melody pipe called by the same name, and played by another performer. The quality of the tone produced is not unpleasing. It has five holes only, and consequently the seventh of the scale is absent, but this can be easily got by octaving the open note of the pipe and covering part of the lower opening of the chanter with the little finger. The Musette, Zampogna, and Cornemuse here shown are from specimens belonging to Messrs. J. & R. Glen, Edinburgh. - Queen Mary's Harp
This venerable instrument, the least impaired Gaelic Harp existing, is known as Queen Mary's Harp. It is small, being only 31 inches high and 18 inches from back to front. It was played resting upon the left knee and against the left shoulder of the performer, whose left hand touched the upper strings. The comb is from 2½ to 3¼ inches high. It is inserted obliquely in the sound chest, and projects about 14 inches. - Lamont Harp
The extreme length of the Lamont Harp is 38 inches, and the extreme width 18½ inches. The sound chest, as with other ancient harps, is hollowed out of one piece of wood, but the back has been in this instrument renewed, although probably a long time ago. The sound chest is 30 inches long, 4 inches in breadth at the top, and 17 at the bottom. The comb projects 15½ inches. The broken parts of the bow are held together by iron clamps. - Burgmote Horns
Beautiful horns of hammered and embossed bronze belonging to the Corporations of Canterbury and Dover. The right-hand one is from Dover, where it was formerly used for the calling together of the Corporation at the order of the mayor. The minutes of the town proceedings were constantly headed "At a common Horn blowing" (comyne Horne Blowying). This practice continued until the year 1670, and is not yet entirely done away with, as it is still blown on the occasion of certain Municipal ceremonies. The motto on this horn is:— JOHANNES DE · ALLEMAINE · ME · FECIT · preceded by the talismanic letters A·G·L·A, which stand for the Hebrew אַתָּה גִּבּוֹר לְעוֹלָם אֲדֹנָי and mean, "Thou art mighty for ever, O Lord!" The horn, which is 31¾ inches long, with a circumference at the larger end of 15½ inches, is of brass, and is deeply chased with a spiral scrollwork of foliage chiefly on a hatched ground. The inscription is on a band that starts four inches from the mouth and continues spirally. The maker's name is now nearly effaced, but the inscription shows that he was a German, and the date is assigned to the thirteenth century. - Jewish Shophar
The Jewish Shophar, a simple ram's horn, a woodcut of which, drawn from an interesting example preserved at the great Synagogue, Aldgate, London, figures at the end of this Introduction, is the oldest wind instrument in present use in the world. It is first named in the Bible as sounding when the Lord descended upon Mount Sinai, and there seems to be little doubt that it has been continuously used in the Mosaic Service from the time it was established until now. It is sounded in the synagogues at the New Year and on the Fast of the Day of Atonement. The Talmud gives ten reasons for sounding the Shophar at the New Year, which may be summed up as reminding those who hear it of the Creation, Penitence, and the Law, of the Prophets, who were as watchmen blowing trumpets, of the Temple and the Binding of Isaac, of Humility, the gathering together of Israel, the Resurrection, and the day of Judgment, when the trumpet shall sound for all. The embouchure of the Shophar is very difficult, and but three proper tones are usually obtained from it, although in some instances-xiii- higher notes can be got. The short rhythmic flourishes are common, with unimportant differences, to both the German and Portuguese Jews, and consequently date from before their separation. - Modern method og grand pianoforte case construction
A. Continuous bent rim. B. Wooden struts. C. Iron shoe holding struts and connecting with iron plate. D. Main beam. - Back view of upright pianoforte
Back view of upright pianoforte, Knabe patents, showing ribbing of sound-board and construction of back framing. - Jonas Chickering’s full solid cast grand metal plate
- Arrangement of iron plate, braces and scale of parlor size grand pianoforte
- Iron plate for upright pianoforte fitted with Capo D’astro bar
- Sketch of iron plate for concert grand
Sketch of iron plate for concert grand, showing general arrangement of braces, belly-bridges and system of bolts for fastening to case. A—B. Hammer line. 1. Body of plate. 2. Bass bridge. 3. Continuous treble bridge. 4. Agraffes. 5. Capo d’astro bar. Plate is cast in one piece and scale is overstrung. - Cristofori’s action in its final form
1. Key. 2. Jack. 3. Jack-operating spring. 4. Cushion limiting rebound of jack. 5. Under-hammer. 6. Hammer-butt. 7. Hinge of hammer-butt. 8. Hammer-shank. 9. Hammer head. 10. Check. 11. Damper-lifter. 12. Damper-head. 13. Action-beam. 14. Wrest-plank. 15. Tuning pins. 16. Bearing-bridge. 17. String. - Iron plate for upright pianoforte with Agraffes (Mehlin patents)
- Action by Andreas and Nanette (Stein), Streicher Viennese escapement (1794)
1. Key. 2. Jack. 3. Jack-operating spring. 4. Cushion limiting rebound of jack. 5. Button and screw regulating escapement of hammer. 6. Hammer-butt and operating face. 7. Hammer-butt pivot. 8. Hammer-shank. 9. Hammer-head. 10. Check. 11. Damper-lifter. 12. Damper-head. 13. Action-rails. - English direct lever grand action, developed by Broadwood from Backers (1884)
1. Key. 2. Jack. 3. Jack operating spring. 4. Rail and cushion limiting travel of jack. 5. Button and screw regulating escapement of hammer. 6. Hammer-butt with operating notch. 7. Hammer-butt flange. 8. Hammer-shank. 9. Hammer-head. 10. Check. 13. Action-rails. - Double repetition action of Sebastian Erard as used by S. & P. Erard, Paris
1. Key. 2. Wippen. 3. Jack. 4. Escapement lever. 5. Hammer-shank. 6. Roller. 7. Hammer-head. 8. Jack regulating button. 9. Regulating button to limit rise of escapement lever. 10. Hammer-butt. 11. Check. 12. Felt cushion to engage with check. 13. Sticker connecting key and wippen. 14. Action-rails. 15. Damper-head. 16. Damper operating device. 17. Device to limit travel of jack. 18. String. 19. Spring (v-shaped) for escapement lever and jack. - The Erard grand action modified by Herz
1. Key. 2. Wippen. 3. Jack. 4. Escapement lever. 5. Hammer-shank. 6. Hammer-butt notch. 7. Hammer-head. 8. Jack regulating button. 9. Regulating button to limit rise of escapement lever. 10. Hammer-butt. 11. Check. 12. Molded tail of hammer-head to engage with check. 13. Capstan-screw connecting key and wippen. 14. Action-rails. 15. Damper-head. 16. Damper-operating device. 17. Device to limit travel of jack. 18. Regulating device for escapement lever. 19. Springs (2) for escapement lever and jack. 20. String. 21. Flange. - Grand pianoforte action with metallic action and damper frames
Grand pianoforte action with metallic action and damper frames, sostenuto pedal device and hammer swinging soft pedal attachment. 22. Sostenuto pedal-rod. 23. Attachment to damper-lever engaging with sostenuto pedal-rod. 24. Metallic action and damper-brackets. 25. Hammer swing-rail and cushion. 26. Hammer swing-rail rod. 27. Hammer swing-rail lifter. 28. Lifter-rod. 29. Lost motion compensating levers. 30. Lost motion compensating levers. - Standard modern American grand action
1. Key. 2. Wippen. 3. Jack. 4. Escapement lever. 5. Hammer-shank. 6. Roller. 7. Hammer-head. 8. Jack-regulating button. 9. Regulating button to limit rise of escapement lever. 10. Hammer-butt. 11. Check. 12. Molded tail of hammer-head to engage with check. 13. Key-rocker and sticker connecting wippen and key. 14. Action-rails. 15. Damper-head. 16. Damper operating device. 17. Device to limit travel of jack. 18. Regulating device for escapement lever. 19. Separate springs for jack and escapement lever. 20. String. 21. Flanges. - Standard American upright action
1. Key-rocker. 2. Abstract. 3. Abstract-lever. 4. Flange. 5. Action-rail. 6. Wippen. 7. Jack. 8. Jack-spring. 9. Check. 10. Check-wire. 11. Bridle-wire. 12. Tip of bridle-tape. 13. Bridle-tape. 14. Back-stop. 15. Regulating rail. 16. Regulating button. 17. Regulating screw. 18. Hammer-butt. 19. Hammer-shank. 20. Hammer-molding. 21. Hammer-head. 22. Hammer-rail. 23. Hammer-butt spring. 24. Hammer-spring rail. 25. Damper-spoon. 26. Damper-lifting rod. 27. Damper-lever. 28. Damper-lever spring. 29. Damper-wire. 30. Damper-block. 31. Damper-head. 32. String. 33. Continuous brass hammer-butt flange. - Upright action showing lost-motion device
Upright action showing lost-motion device, metallic regulating rail support, capstan screw, jack regulating rail and metallic action brackets. 34. Hammer-rail lifter-wire. 35. Hammer-rail swing-lever. 36. Hammer-rail lifter rod. 37. Lifter-rod lever. 38. Compensation-lever. 39. Capstan-screw. 40. Rail for limiting return movement of jack. 41. Metallic regulating rail support. - Saxon Pneumatic Organ
The organ, already introduced into divine service, became, under the hands of St. Dunstan, a large and important instrument. William of Malmesbury says that Dunstan gave many to churches which had pipes of brass and were inflated with bellows. In a MS. psalter in Trinity College, Cambridge, is a picture of one of considerable size, which has no less than four bellows played by four men. [Comment on the same picture in book Musical Instruments, by Carl Engel Published in 1875 and Available from gutenberg.org] Some progress in the construction of the organ is exhibited in an illustration dating from the twelfth century, in a psalter of Eadwine, in the library of Trinity college, Cambridge. The instrument has ten pipes, or perhaps fourteen, as four of them appear to be double pipes. It required four men exerting all their power to produce the necessary wind, and two men to play the instrument. Moreover, both players seem also to be busily engaged in directing the blowers about the proper supply of wind. Six men and only fourteen pipes! It must be admitted that since the twelfth century some progress has been made, at all events, in the construction of the organ. - A Positive Organ
- Early form of the regals
- Early Organ
- Organ
- Peruvian Pan Pipes
- Cithara or Phorminx
Cithara or Phorminx, from a Greek vase vase in the British Museum. - Four-course Cittern
- Oliphant
Olifant, or Hunting-horn, in Ivory (Fourteenth Century).--From an Original existing in England. - Italian Spinet
Ornamented with precious stones Made by Annibale Dei Rossi, of Milan in the year 1577 - Rebab
The Rebab, an Arab instrument of the violin class, is especially used for accompanying the voice. - Tabl Shamee
Tabl Shamee Small kettle drum The name tabl shamee, signifying 'Syrian drum', indicates that this kind of drum was probably introduced into Egypt from Western Asia. It is usually made from tinned copper, with a parchment face. The Egyptians use the Tabl shamee especially in bridal processions, and on similar festive occasions. The performer carries it suspended from his neck and beats it with two slender sticks. - Nubian Kissar
Nubian Kissar Kissar Round body of wood and skin, Five strings Length 1 foot 9 1/2 inches. - Nanja
Nanja Negro harp of the NiamNiams a tribe in the vicinity of the Bahr-el-Abiad. The body is of hollowed wood covered with skin, and the wooden neck terminates in a carved head with two horns. - Ashanti Ivory Trumpet
Negro Trumpet. Ivory. From the regions of the White Nile The large ivory trumpet is used by the Niam-Niams, and other negro tribes, for transmitting signals in times of war. - Archlute
Archlute Wood, inlaid with ivory and tortoise-shell, engraved. Two sets of tuning pegs, the lower containing fourteen, and the higher, ten. On the middle of the neck is an ovl plate of mother-of-pearl, bering the German inscription, Gott der Herr ist Sonne und Schield ("God, the Lord, is sun and shield.") About 1700 - Taki-goto
Taki-Goto Bamboo, with 13 strings of silk neatly twisted. The body ornamented with embroidered work, and painted with inscriptions, flowers and foliage ; in the center is carved an open fan. - Viola di Bardone
Viola di Bardone The finger-board is carved in open fret-work terminating in three lions' heads; above the bridge are two figures of negrose, carved and gilt. German 1686 - Virginal
Virginal The instruments has mtal strings, one for each tone, whiched are twanged by means of small portions of quill, attached to slips of wood called "jacks" and provided with thin metal springs. German. About 1600 - Biva
Biva A kind of lute. The body is of wood, lacquered black, and ornamented with a band of Japanese design in gold lacquer. Four strings and two very small soundholes. - Cheng
Cheng Containing 17 pipes of small bamboo reeds, arranged in five sets, each having pipes of equal length. - Chitarrone
Chitarrone A therbo. Wood, inlaid with ebony, ivory, and coloured woods. Two sets of wooden tuning-pegs, the lower containing twelve, and the higher eight. The instrument had wire strings. - Handel's Harpsichord
Handel's Harpsichord. Case of deal, black japanned; with internal ornaments of flowers painted, and inscriptions in gold. Made by Andrea Ruckers, of Antwerp, 1651 - Kobsa
Kobsa A kind of Lute, Wood, painted. Ten strings, of which nine are ctgut, and one of silk covered with thin wire. A species of kobsa with eight strings is an old popular instrument of the Russians.