1 photo
Home / Albums / Technology / Musical Instruments 84
-
String
11 photos
- Constituent parts of the violin - Interior
- The bow
This received its name from its ancient form, which has undergone many alterations before the present form was arrived at - Constituent parts of the bow
- Constituent parts of the violin - Exterior
The most important part is the upper table or belly (a). The other parts are the ribs or sides (b), the back (c), the neck (d), the head comprising the scroll and peg box (e), the pegs (f), the finger board (g), the bridge (h), the tailpiece (i), the button[3] (k), the nut (l), and the f or sound-holes (m). The interior of the violin contains the soundpost and the bass bar. - Position of the left hand and the left arm
The violin is held with the left hand and rests on the left collar bone. The instrument must be horizontal. To give a firm grip, a small pad is often placed between the violin and the left shoulder. A chin-rest screwed to the ribs, and covering a part of the upper table, is also to be recommended. The chin-rest serves also to protect the varnish. To prove that the violin is held securely and well, the left hand may be removed. - Holding the bow
- Rabab
. Rabab—Arabian bowed instrument (of Persian origin). Pictures of Indian and Persian bowed instruments exist, but the period when they were employed is not exactly known. - Raba—Indian violin
Pictures of Indian and Persian bowed instruments exist, but the period when they were employed is not exactly known. - Piano
- Jewish Shophar
The Jewish Shophar, a simple ram's horn, a woodcut of which, drawn from an interesting example preserved at the great Synagogue, Aldgate, London, figures at the end of this Introduction, is the oldest wind instrument in present use in the world. It is first named in the Bible as sounding when the Lord descended upon Mount Sinai, and there seems to be little doubt that it has been continuously used in the Mosaic Service from the time it was established until now. It is sounded in the synagogues at the New Year and on the Fast of the Day of Atonement. The Talmud gives ten reasons for sounding the Shophar at the New Year, which may be summed up as reminding those who hear it of the Creation, Penitence, and the Law, of the Prophets, who were as watchmen blowing trumpets, of the Temple and the Binding of Isaac, of Humility, the gathering together of Israel, the Resurrection, and the day of Judgment, when the trumpet shall sound for all. The embouchure of the Shophar is very difficult, and but three proper tones are usually obtained from it, although in some instances-xiii- higher notes can be got. The short rhythmic flourishes are common, with unimportant differences, to both the German and Portuguese Jews, and consequently date from before their separation. - Standard modern American grand action
1. Key. 2. Wippen. 3. Jack. 4. Escapement lever. 5. Hammer-shank. 6. Roller. 7. Hammer-head. 8. Jack-regulating button. 9. Regulating button to limit rise of escapement lever. 10. Hammer-butt. 11. Check. 12. Molded tail of hammer-head to engage with check. 13. Key-rocker and sticker connecting wippen and key. 14. Action-rails. 15. Damper-head. 16. Damper operating device. 17. Device to limit travel of jack. 18. Regulating device for escapement lever. 19. Separate springs for jack and escapement lever. 20. String. 21. Flanges. - Standard American upright action
1. Key-rocker. 2. Abstract. 3. Abstract-lever. 4. Flange. 5. Action-rail. 6. Wippen. 7. Jack. 8. Jack-spring. 9. Check. 10. Check-wire. 11. Bridle-wire. 12. Tip of bridle-tape. 13. Bridle-tape. 14. Back-stop. 15. Regulating rail. 16. Regulating button. 17. Regulating screw. 18. Hammer-butt. 19. Hammer-shank. 20. Hammer-molding. 21. Hammer-head. 22. Hammer-rail. 23. Hammer-butt spring. 24. Hammer-spring rail. 25. Damper-spoon. 26. Damper-lifting rod. 27. Damper-lever. 28. Damper-lever spring. 29. Damper-wire. 30. Damper-block. 31. Damper-head. 32. String. 33. Continuous brass hammer-butt flange. - Italian Spinet
Ornamented with precious stones Made by Annibale Dei Rossi, of Milan in the year 1577 - Grand pianoforte action with metallic action and damper frames
Grand pianoforte action with metallic action and damper frames, sostenuto pedal device and hammer swinging soft pedal attachment. 22. Sostenuto pedal-rod. 23. Attachment to damper-lever engaging with sostenuto pedal-rod. 24. Metallic action and damper-brackets. 25. Hammer swing-rail and cushion. 26. Hammer swing-rail rod. 27. Hammer swing-rail lifter. 28. Lifter-rod. 29. Lost motion compensating levers. 30. Lost motion compensating levers. - Sketch of iron plate for concert grand
Sketch of iron plate for concert grand, showing general arrangement of braces, belly-bridges and system of bolts for fastening to case. A—B. Hammer line. 1. Body of plate. 2. Bass bridge. 3. Continuous treble bridge. 4. Agraffes. 5. Capo d’astro bar. Plate is cast in one piece and scale is overstrung. - Modern method og grand pianoforte case construction
A. Continuous bent rim. B. Wooden struts. C. Iron shoe holding struts and connecting with iron plate. D. Main beam. - Jonas Chickering’s full solid cast grand metal plate
- Upright action showing lost-motion device
Upright action showing lost-motion device, metallic regulating rail support, capstan screw, jack regulating rail and metallic action brackets. 34. Hammer-rail lifter-wire. 35. Hammer-rail swing-lever. 36. Hammer-rail lifter rod. 37. Lifter-rod lever. 38. Compensation-lever. 39. Capstan-screw. 40. Rail for limiting return movement of jack. 41. Metallic regulating rail support. - Back view of upright pianoforte
Back view of upright pianoforte, Knabe patents, showing ribbing of sound-board and construction of back framing. - Nubian Kissar
Nubian Kissar Kissar Round body of wood and skin, Five strings Length 1 foot 9 1/2 inches. - Arrangement of iron plate, braces and scale of parlor size grand pianoforte
- Cristofori’s action in its final form
1. Key. 2. Jack. 3. Jack-operating spring. 4. Cushion limiting rebound of jack. 5. Under-hammer. 6. Hammer-butt. 7. Hinge of hammer-butt. 8. Hammer-shank. 9. Hammer head. 10. Check. 11. Damper-lifter. 12. Damper-head. 13. Action-beam. 14. Wrest-plank. 15. Tuning pins. 16. Bearing-bridge. 17. String. - Iron plate for upright pianoforte with Agraffes (Mehlin patents)
- The Erard grand action modified by Herz
1. Key. 2. Wippen. 3. Jack. 4. Escapement lever. 5. Hammer-shank. 6. Hammer-butt notch. 7. Hammer-head. 8. Jack regulating button. 9. Regulating button to limit rise of escapement lever. 10. Hammer-butt. 11. Check. 12. Molded tail of hammer-head to engage with check. 13. Capstan-screw connecting key and wippen. 14. Action-rails. 15. Damper-head. 16. Damper-operating device. 17. Device to limit travel of jack. 18. Regulating device for escapement lever. 19. Springs (2) for escapement lever and jack. 20. String. 21. Flange. - Cornemuse, Calabrian Bagpipe, Musette
The Calabrian Bagpipe or Zampogna is a rudely carved instrument of the eighteenth century. It has four drones attached to one stock, hanging downwards from the end of the bag: two of them are furnished with finger-holes. The reeds are double like those of the oboe and bassoon. The bag is large; it is inflated by the mouth and pressed by the left arm against the chest of the performer. The Zampogna is chiefly used as an accompaniment to a small reed melody pipe called by the same name, and played by another performer. The quality of the tone produced is not unpleasing. It has five holes only, and consequently the seventh of the scale is absent, but this can be easily got by octaving the open note of the pipe and covering part of the lower opening of the chanter with the little finger. The Musette, Zampogna, and Cornemuse here shown are from specimens belonging to Messrs. J. & R. Glen, Edinburgh. - Action by Andreas and Nanette (Stein), Streicher Viennese escapement (1794)
1. Key. 2. Jack. 3. Jack-operating spring. 4. Cushion limiting rebound of jack. 5. Button and screw regulating escapement of hammer. 6. Hammer-butt and operating face. 7. Hammer-butt pivot. 8. Hammer-shank. 9. Hammer-head. 10. Check. 11. Damper-lifter. 12. Damper-head. 13. Action-rails. - Iron plate for upright pianoforte fitted with Capo D’astro bar
- English direct lever grand action, developed by Broadwood from Backers (1884)
1. Key. 2. Jack. 3. Jack operating spring. 4. Rail and cushion limiting travel of jack. 5. Button and screw regulating escapement of hammer. 6. Hammer-butt with operating notch. 7. Hammer-butt flange. 8. Hammer-shank. 9. Hammer-head. 10. Check. 13. Action-rails. - Double repetition action of Sebastian Erard as used by S. & P. Erard, Paris
1. Key. 2. Wippen. 3. Jack. 4. Escapement lever. 5. Hammer-shank. 6. Roller. 7. Hammer-head. 8. Jack regulating button. 9. Regulating button to limit rise of escapement lever. 10. Hammer-butt. 11. Check. 12. Felt cushion to engage with check. 13. Sticker connecting key and wippen. 14. Action-rails. 15. Damper-head. 16. Damper operating device. 17. Device to limit travel of jack. 18. String. 19. Spring (v-shaped) for escapement lever and jack. - Cithara or Phorminx
Cithara or Phorminx, from a Greek vase vase in the British Museum. - Organistrum
The construction of the organistrum requires but little explanation. A glance at the finger-board reveals at once that the different tones were obtained by raising the keys placed on the neck under the strings, and that the keys were raised by means of the handles at the side of the neck. Of the two bridges shown on the body, the one situated nearest the middle was formed by a wheel in the inside, which projected through the sound-board. The wheel which slightly touched the strings vibrated them by friction when turned by the handle at the end. The order of intervals was c, d, e, f, g, a, b-flat, b-natural, c, and were obtainable on the highest string. There is reason to suppose that the other two strings were generally tuned a fifth and an octave below the highest. The organistrum may be regarded as the predecessor of the hurdy-gurdy, and was a rather cumbrous contrivance. Two persons seem to have been required to sound it, one to turn the handle and the other to manage the keys. Thus it is generally represented in mediæval concerts. - Oliphant
Olifant, or Hunting-horn, in Ivory (Fourteenth Century).--From an Original existing in England. - Burgmote Horns
Beautiful horns of hammered and embossed bronze belonging to the Corporations of Canterbury and Dover. The right-hand one is from Dover, where it was formerly used for the calling together of the Corporation at the order of the mayor. The minutes of the town proceedings were constantly headed "At a common Horn blowing" (comyne Horne Blowying). This practice continued until the year 1670, and is not yet entirely done away with, as it is still blown on the occasion of certain Municipal ceremonies. The motto on this horn is:— JOHANNES DE · ALLEMAINE · ME · FECIT · preceded by the talismanic letters A·G·L·A, which stand for the Hebrew אַתָּה גִּבּוֹר לְעוֹלָם אֲדֹנָי and mean, "Thou art mighty for ever, O Lord!" The horn, which is 31¾ inches long, with a circumference at the larger end of 15½ inches, is of brass, and is deeply chased with a spiral scrollwork of foliage chiefly on a hatched ground. The inscription is on a band that starts four inches from the mouth and continues spirally. The maker's name is now nearly effaced, but the inscription shows that he was a German, and the date is assigned to the thirteenth century. - Early Organ
- Organ
- Monochord
The monochord was mounted with a single string stretched over two bridges which were fixed on an oblong box. The string could be tightened or slackened by means of a turning screw inserted into one end of the box. The intervals of the scale were marked on the side, and were regulated by a sort of movable bridge placed beneath the string when required. As might be expected, the monochord was chiefly used by theorists; for any musical performance it was but little suitable. About a thousand years ago when this monochord was in use the musical scale was diatonic, with the exception of the interval of the seventh, which was chromatic inasmuch as both b-flat and b-natural formed part of the scale. The notation on the preceding page exhibits the compass as well as the order of intervals adhered to about the tenth century. - Early form of the regals
- Peruvian Pan Pipes
- Saxon Pneumatic Organ
The organ, already introduced into divine service, became, under the hands of St. Dunstan, a large and important instrument. William of Malmesbury says that Dunstan gave many to churches which had pipes of brass and were inflated with bellows. In a MS. psalter in Trinity College, Cambridge, is a picture of one of considerable size, which has no less than four bellows played by four men. [Comment on the same picture in book Musical Instruments, by Carl Engel Published in 1875 and Available from gutenberg.org] Some progress in the construction of the organ is exhibited in an illustration dating from the twelfth century, in a psalter of Eadwine, in the library of Trinity college, Cambridge. The instrument has ten pipes, or perhaps fourteen, as four of them appear to be double pipes. It required four men exerting all their power to produce the necessary wind, and two men to play the instrument. Moreover, both players seem also to be busily engaged in directing the blowers about the proper supply of wind. Six men and only fourteen pipes! It must be admitted that since the twelfth century some progress has been made, at all events, in the construction of the organ. - The Kimmori
Another favourite instrument is the 'kimmori.' This also derives its sounding powers from gourds, of which three are usually slung from the tube forming the body. It is said by the natives to have been invented by one of the singers of the 'Brahma Loka,' or heaven of the Brahmins. The 'kimmori' is made of a pipe of bamboo or blackwood, with frets or screws, which should be fashioned of the scales of the pangolin, or scaly ant-eater, though more often they are made of bone or metal. It has only two strings, one touching the frets, the other carried above them. The tail-piece is always carved like the breast of a kite, and the instrument is frequently found sculptured on ancient temples and shrines, especially in Mysore, in the south of Hindustan. - The 'Tse King.'
Another curious Chinese instrument is the 'ou,' which is made of wood, and fashioned like a crouching tiger. It is hollow, and along its back run metal teeth, which are played with a small stick or brush. The 'ou' stands on a hollow pedestal, also of wood, which serves as a sounding board and increases the tone. See also - A Positive Organ
- Scotch bagpipe, eighteenth century
The bagpipe appears to have been from time immemorial a special favourite instrument with the Celtic races; but it was perhaps quite as much admired by the Slavonic nations. In Poland, and in the Ukraine, it used to be made of the whole skin of the goat in which the shape of the animal, whenever the bagpipe was expanded with air, appeared fully retained, exhibiting even the head with the horns; hence the bagpipe was called kosa, which signifies a goat. The woodcut represents a Scotch bagpipe of the eighteenth century. - Pneumatic organ, fourth century
The pneumatic organ is sculptured on an obelisk which was erected in Constantinople under Theodosius the great, towards the end of the fourth century. The bellows were pressed by men standing on them: see page 103. This interesting monument also exhibits performers on the double flute. The hydraulic organ, which is recorded to have been already known about two hundred years before the Christian era, was according to some statements occasionally employed in churches during the earlier centuries of the middle ages. Probably it was more frequently heard in secular entertainments for which it was more suitable; and at the beginning of the fourteenth century appears to have been entirely supplanted by the pneumatic organ. The earliest organs had only about a dozen pipes. - Basset Horn
Basset Horn: a wood-wind instrument, not a "horn," member of the clarinet family, of which it is the tenor. The basset horn consists of a nearly cylindrical tube of wood (generally cocus or box-wood), having a cylindrical bore and terminating in a metal bell wider than that of the clarinet. - Barrel Organ
Large stationary barrel-organ worked by hydraulic power, from Solomon de Caus, Les Raisons des forces mouvantes (Frankfort-on-Main, 1615). The origin of the barrel-organ is now clearly established, and many will doubtless be surprised to find that it must be sought in the Netherlands as early as the middle of the 15th century, and that accurate and detailed diagrams of every part of the mechanism for a large stationary barrel-organ worked by hydraulic power were published in 1615 - Anglo-saxon fiddle
An interesting drawing of an Anglo-saxon fiddle—or fithele, as it was called—is given in a manuscript of the eleventh century in the British museum (Cotton, Tiberius, c. 6). The instrument is of a pear shape, with four strings, and the bridge is not indicated. - Syrinx
Of the syrinx there are extant some illustrations of the ninth and tenth centuries, which exhibit the instrument with a number of tubes tied together, just like the Pandean pipe still in use. In one specimen engraved from a manuscript of the eleventh century the tubes were inserted into a bowl-shaped box. This is probably the frestele, fretel, or fretiau, which in the twelfth and thirteenth centuries was in favour with the French ménétriers. - Nanja
Nanja Negro harp of the NiamNiams a tribe in the vicinity of the Bahr-el-Abiad. The body is of hollowed wood covered with skin, and the wooden neck terminates in a carved head with two horns. - Bassoon
Bassoon, a woodwind instrument with double reed mouthpiece, a member of the oboe (q.v.) family, of which it is the bass. The German and Italian names of the instrument were bestowed from a fancied resemblance to a bundle of sticks, the bassoon being the first instrument of the kind to be doubled back upon itself; its direct ancestor, the bass pommer, 6 ft. in length, was quite straight. The English and French names refer to the pitch of the instrument as the bass of the wood-wind. - Cheng
Cheng Containing 17 pipes of small bamboo reeds, arranged in five sets, each having pipes of equal length. - Ta'khay, or Alligator
A very curious instrument is known as the Ta'khay, or Alligator: a glance at its form will readily account for its name. There seems a sort of satire in making one of the most silent of savage monsters a medium for the conveyance of sweet sounds. The Ta'khay is a stringed instrument of considerable power, and in tone is not unlike a violoncello. The three strings pass over eleven frets or wide movable bridges, and the shape of the body is rather like that of a guitar. It is placed on the ground, raised on low feet, and the player squats beside it. The strings are sounded by a plectrum, or plucker, shaped like an ivory tooth, fastened to the fingers, and drawn backwards and forwards so rapidly that it produces an almost continuous sweet dreamy sound. - Handel's Harpsichord
Handel's Harpsichord. Case of deal, black japanned; with internal ornaments of flowers painted, and inscriptions in gold. Made by Andrea Ruckers, of Antwerp, 1651 - Saw Tai
The Saw Tai is the real Siamese violin, and is frequently of most elaborate construction. The upper neck of the one shown in the illustration is of gold, beautifully enamelled, while the lower neck is of ivory, richly carved. The back of the instrument is made of cocoa-nut shell, ornamented with jewels. The membrane stretched on the sounding-board, which gives the effect of a pair of bellows, is made of parchment, and has often, as in this special instrument, a jewelled ornament inserted in one corner. The Saw Tai has three strings of silk cord, which, passing over a bridge on the sounding-board, run up to the neck, being bound tightly to it below the pegs. The player sitting cross-legged on the ground holds the fiddle in a sloping posture, and touches the strings with a curiously curved bow. - Zulu Marimba
The Zulus, or more correctly the Amazulus, take the front `rank` amongst the native tribes of the African continent. Their code of laws, military arrangements, and orderly settlements resemble those of civilised nations at many points. Their dances are a national feature, and a great company of young warriors performing a solemn war dance is a most impressive sight. One of their chief instruments is the 'Marimba' or 'Tyanbilo,' a form of harmonium. The keys are bars of wood called Intyari, of graduated size. These are suspended by strings from a light wooden frame, either resting on the ground, or hung round the neck of the player. Between every two keys is a wooden bar crossing the centre bar to which the keys are attached. On each key two shells of the fruit known as the Strychnos McKenzie, or Kaffir Orange, are placed as resonators, one large and one small. The use of resonators is to increase and deepen the sound. The Marimba is played with drum-sticks of rubber, and the tone is good and powerful. - Virginal
Virginal The instruments has mtal strings, one for each tone, whiched are twanged by means of small portions of quill, attached to slips of wood called "jacks" and provided with thin metal springs. German. About 1600 - The minstrels’ gallery, at Exeter cathedral
The minstrels’ gallery of Exeter cathedral dates from the fourteenth century. The front is divided into twelve niches, each of which contains a winged figure or an angel playing on an instrument of music. The instruments are so much dilapidated that some of them cannot be clearly recognized; but, as far as may be ascertained, they appear to be as follows:—1. The cittern. 2. The bagpipe. 3. The clarion, a small trumpet having a shrill sound. 4. The rebec. 5. The psaltery. 6. The syrinx. 7. The sackbut. 8. The regals. 9. The gittern, a small guitar strung with catgut. 10. The shalm. 11. The timbrel; resembling our present tambourine, with a double row of gingles. 12. Cymbals. The shalm, or shawm, was a pipe with a reed in the mouth-hole. The wait was an English wind instrument of the same construction. If it differed in any respect from the shalm, the difference consisted probably in the size only. The wait obtained its name from being used principally by watchmen, or waights, to proclaim the time of night. Such were the poor ancestors of our fine oboe and clarinet. - Guatemalan Marimba
Another form of Marimba is popular amongst the natives of Guatemala, in Central America. Its construction is much that of a rough table, the top being formed of twenty-eight wooden bars or keys, from each of which hangs a hollow piece of wood, varying in size; these take the place of the resonating shells of the Zulu Marimba. The instrument is usually about six and a half feet long, by two and a half wide, and the keys are struck by hammers topped with rubber. Three performers often play together with great skill. This form of Marimba is also met with amongst the natives of Costa Rica.