- The Arpa
The Arpa or drum of Oceana is made of wood, and imitates the head and jaws of a crocodile, with a handle for carrying purposes. The head is covered with snake-skin, which sometimes gives it an unpleasantly real appearance. It is used by the natives of New Guinea, especially by those dwelling around the Gulf of Papua. - Zulu Marimba
The Zulus, or more correctly the Amazulus, take the front `rank` amongst the native tribes of the African continent. Their code of laws, military arrangements, and orderly settlements resemble those of civilised nations at many points. Their dances are a national feature, and a great company of young warriors performing a solemn war dance is a most impressive sight. One of their chief instruments is the 'Marimba' or 'Tyanbilo,' a form of harmonium. The keys are bars of wood called Intyari, of graduated size. These are suspended by strings from a light wooden frame, either resting on the ground, or hung round the neck of the player. Between every two keys is a wooden bar crossing the centre bar to which the keys are attached. On each key two shells of the fruit known as the Strychnos McKenzie, or Kaffir Orange, are placed as resonators, one large and one small. The use of resonators is to increase and deepen the sound. The Marimba is played with drum-sticks of rubber, and the tone is good and powerful. - Aztec whistles
The Mexicans possessed a small whistle formed of baked clay, a considerable number of which have been found. Some specimens are singularly grotesque in shape, representing caricatures of the human face and figure, birds, beasts, and flowers. Some were provided at the top with a finger-hole which, when closed, altered the pitch of the sound, so that two different tones were producible on the instrument. Others had a little ball of baked clay lying loose inside the air-chamber. When the instrument was blown the current of air set the ball in a vibrating motion, thereby causing a shrill and whirring sound. - Saw Tai
The Saw Tai is the real Siamese violin, and is frequently of most elaborate construction. The upper neck of the one shown in the illustration is of gold, beautifully enamelled, while the lower neck is of ivory, richly carved. The back of the instrument is made of cocoa-nut shell, ornamented with jewels. The membrane stretched on the sounding-board, which gives the effect of a pair of bellows, is made of parchment, and has often, as in this special instrument, a jewelled ornament inserted in one corner. The Saw Tai has three strings of silk cord, which, passing over a bridge on the sounding-board, run up to the neck, being bound tightly to it below the pegs. The player sitting cross-legged on the ground holds the fiddle in a sloping posture, and touches the strings with a curiously curved bow. - Handel's Harpsichord
Handel's Harpsichord. Case of deal, black japanned; with internal ornaments of flowers painted, and inscriptions in gold. Made by Andrea Ruckers, of Antwerp, 1651 - Ta'khay, or Alligator
A very curious instrument is known as the Ta'khay, or Alligator: a glance at its form will readily account for its name. There seems a sort of satire in making one of the most silent of savage monsters a medium for the conveyance of sweet sounds. The Ta'khay is a stringed instrument of considerable power, and in tone is not unlike a violoncello. The three strings pass over eleven frets or wide movable bridges, and the shape of the body is rather like that of a guitar. It is placed on the ground, raised on low feet, and the player squats beside it. The strings are sounded by a plectrum, or plucker, shaped like an ivory tooth, fastened to the fingers, and drawn backwards and forwards so rapidly that it produces an almost continuous sweet dreamy sound. - Syrinx
Of the syrinx there are extant some illustrations of the ninth and tenth centuries, which exhibit the instrument with a number of tubes tied together, just like the Pandean pipe still in use. In one specimen engraved from a manuscript of the eleventh century the tubes were inserted into a bowl-shaped box. This is probably the frestele, fretel, or fretiau, which in the twelfth and thirteenth centuries was in favour with the French ménétriers. - Bassoon
Bassoon, a woodwind instrument with double reed mouthpiece, a member of the oboe (q.v.) family, of which it is the bass. The German and Italian names of the instrument were bestowed from a fancied resemblance to a bundle of sticks, the bassoon being the first instrument of the kind to be doubled back upon itself; its direct ancestor, the bass pommer, 6 ft. in length, was quite straight. The English and French names refer to the pitch of the instrument as the bass of the wood-wind. - Cheng
Cheng Containing 17 pipes of small bamboo reeds, arranged in five sets, each having pipes of equal length. - Tahitian flute-player
Tahitian flute-player - Basset Horn
Basset Horn: a wood-wind instrument, not a "horn," member of the clarinet family, of which it is the tenor. The basset horn consists of a nearly cylindrical tube of wood (generally cocus or box-wood), having a cylindrical bore and terminating in a metal bell wider than that of the clarinet. - Anglo-saxon fiddle
An interesting drawing of an Anglo-saxon fiddle—or fithele, as it was called—is given in a manuscript of the eleventh century in the British museum (Cotton, Tiberius, c. 6). The instrument is of a pear shape, with four strings, and the bridge is not indicated. - Barrel Organ
Large stationary barrel-organ worked by hydraulic power, from Solomon de Caus, Les Raisons des forces mouvantes (Frankfort-on-Main, 1615). The origin of the barrel-organ is now clearly established, and many will doubtless be surprised to find that it must be sought in the Netherlands as early as the middle of the 15th century, and that accurate and detailed diagrams of every part of the mechanism for a large stationary barrel-organ worked by hydraulic power were published in 1615 - Pneumatic organ, fourth century
The pneumatic organ is sculptured on an obelisk which was erected in Constantinople under Theodosius the great, towards the end of the fourth century. The bellows were pressed by men standing on them: see page 103. This interesting monument also exhibits performers on the double flute. The hydraulic organ, which is recorded to have been already known about two hundred years before the Christian era, was according to some statements occasionally employed in churches during the earlier centuries of the middle ages. Probably it was more frequently heard in secular entertainments for which it was more suitable; and at the beginning of the fourteenth century appears to have been entirely supplanted by the pneumatic organ. The earliest organs had only about a dozen pipes. - Scotch bagpipe, eighteenth century
The bagpipe appears to have been from time immemorial a special favourite instrument with the Celtic races; but it was perhaps quite as much admired by the Slavonic nations. In Poland, and in the Ukraine, it used to be made of the whole skin of the goat in which the shape of the animal, whenever the bagpipe was expanded with air, appeared fully retained, exhibiting even the head with the horns; hence the bagpipe was called kosa, which signifies a goat. The woodcut represents a Scotch bagpipe of the eighteenth century. - Musical instrument divider
Musical instrument divider - Four-course Cittern
- How to hold the Cello bow
The knuckles must not protrude in the least, the fingers also help by being allowed to bend easily at their middle joints, the upper phalanges having an almost horizontal position over the bow - A Positive Organ
- How to hold the Cello
Most pupils are surprised I have no doubt, at the evident discrepancy seen in the plates usually published with 'cello schools, when compared with the manner in which our first class artists hold their instruments. - The 'Tse King.'
Another curious Chinese instrument is the 'ou,' which is made of wood, and fashioned like a crouching tiger. It is hollow, and along its back run metal teeth, which are played with a small stick or brush. The 'ou' stands on a hollow pedestal, also of wood, which serves as a sounding board and increases the tone. See also - Prehistoric Whistle
A musical relic has recently been exhumed in the department of Dordogne in France, which was constructed in an age when the fauna of France included the reindeer, the rhinoceros, and the mammoth, the hyæna, the bear, and the cave-lion. It is a small bone somewhat less than two inches in length, in which is a hole, evidently bored by means of one of the little flint knives which men used before acquaintance with the employment of metal for tools and weapons. Many of these flints were found in the same place with the bones. Only about half a dozen of the bones, of which a considerable number have been exhumed, possess the artificial hole. - Action of the Square Piano
A. Action Frame. B's Indicate the Cushions, or Bushing, of felt, cloth or leather. C. Balance Rail. D. Balance Pin. Round. E. Mortised Cap for Balance Pin. Bushed. F. Key. G. Lead. H. Back Check. I. Bottom or Key Rocker. J. Bottom Screws; used to regulate height of Jack. K. Jack. L. Jack Spring; concealed under Bottom. M. Center Pin to Jack. N. Hammer Rail. O. Regulating Screw. P. Regulating Button. Q. Flange Rail. R. Flange. Split. S. Flange Rail Screw. T. Flange Screw, to regulate jaws of flange. U. Hammer Butt. V. Center Pin. W. Hammer Stem or Shank. X. Hammer Head. Y. Hammer Felt. Treble hammers sometimes capped with buckskin in old instruments. - Girl playing a flutelike instrument while running through some leaves
- The Bin
The 'bin,' or 'vina,' may be regarded as the national instrument of India. The 'bin' is made of wood, and has seven strings, two of steel, the rest of silver, and these are plucked by the two first fingers of the performer, who wears little metal shields made for the purpose. It is tuned by pegs, and has two gourds suspended below, each usually measuring about fourteen inches across. These, being of irregular shape and gaily coloured, give a very picturesque look to the instrument. - The Kimmori
Another favourite instrument is the 'kimmori.' This also derives its sounding powers from gourds, of which three are usually slung from the tube forming the body. It is said by the natives to have been invented by one of the singers of the 'Brahma Loka,' or heaven of the Brahmins. The 'kimmori' is made of a pipe of bamboo or blackwood, with frets or screws, which should be fashioned of the scales of the pangolin, or scaly ant-eater, though more often they are made of bone or metal. It has only two strings, one touching the frets, the other carried above them. The tail-piece is always carved like the breast of a kite, and the instrument is frequently found sculptured on ancient temples and shrines, especially in Mysore, in the south of Hindustan. - Saxon Pneumatic Organ
The organ, already introduced into divine service, became, under the hands of St. Dunstan, a large and important instrument. William of Malmesbury says that Dunstan gave many to churches which had pipes of brass and were inflated with bellows. In a MS. psalter in Trinity College, Cambridge, is a picture of one of considerable size, which has no less than four bellows played by four men. [Comment on the same picture in book Musical Instruments, by Carl Engel Published in 1875 and Available from gutenberg.org] Some progress in the construction of the organ is exhibited in an illustration dating from the twelfth century, in a psalter of Eadwine, in the library of Trinity college, Cambridge. The instrument has ten pipes, or perhaps fourteen, as four of them appear to be double pipes. It required four men exerting all their power to produce the necessary wind, and two men to play the instrument. Moreover, both players seem also to be busily engaged in directing the blowers about the proper supply of wind. Six men and only fourteen pipes! It must be admitted that since the twelfth century some progress has been made, at all events, in the construction of the organ. - Peruvian Pan Pipes
- Early form of the regals
- Monochord
The monochord was mounted with a single string stretched over two bridges which were fixed on an oblong box. The string could be tightened or slackened by means of a turning screw inserted into one end of the box. The intervals of the scale were marked on the side, and were regulated by a sort of movable bridge placed beneath the string when required. As might be expected, the monochord was chiefly used by theorists; for any musical performance it was but little suitable. About a thousand years ago when this monochord was in use the musical scale was diatonic, with the exception of the interval of the seventh, which was chromatic inasmuch as both b-flat and b-natural formed part of the scale. The notation on the preceding page exhibits the compass as well as the order of intervals adhered to about the tenth century. - Queen Mary's Harp
This venerable instrument, the least impaired Gaelic Harp existing, is known as Queen Mary's Harp. It is small, being only 31 inches high and 18 inches from back to front. It was played resting upon the left knee and against the left shoulder of the performer, whose left hand touched the upper strings. The comb is from 2½ to 3¼ inches high. It is inserted obliquely in the sound chest, and projects about 14 inches. - Upright Piano Action
Ky, is the Key in its resting position. c, wherever found, represents a cushion of felt or soft leather upon which the different parts of the action rest or come in contact with each other. Their purpose, as is readily seen, is that of rendering the action noiseless and easy of operation. Bnc R, shows the end of the balance rail, extending the entire length of the keyboard. B P, is the balance pin. This is a perfectly round pin driven firmly in the balance rail. The bottom of the hole in the key fits closely around the balance pin; at the top, it is the shape of a mortise, parallel with the key, which allows the key to move only in the direction intended. The mortise in the wooden cap on top of the key at this point is lined with bushing cloth which holds the key in position laterally, and prevents looseness and rattling, yet allows the key to move easily. - A Muse playing the Diaulos
The single flute was called monaulos, and the double one diaulos. A diaulos, which was found in a tomb at Athens, is in the British Museum. The wood of which it is made seems to be cedar, and the tubes are fifteen inches in length. Each tube has a separate mouth-piece and six finger-holes, five of which are at the upper side and one is underneath. - Organ
- Harp
- Action of the Grand Piano
1. Indicates the felt, cloth or leather, upon which the various parts of the action rest, or fall noiselessly. 2. Key. 3. Bottom; sometimes called Key Rocker. 4. Extension; split at lower end to receive center pin in Bottom. 5. Wippen Support. 6. Jack. 7. Jack Spring. 8. Flange and Regulating Rail. 9. Regulating Screw, Button and Cushion. 10. Escapement Lever. 11. Regulating Screw in Hammer Flange, for Escapement Lever. 12. Check Wire, for Escapement Lever. 13. Screw to regulate fall of Escapement Lever. 14. Lever Flange, screwed to Flange Rail. 15. Hammer Shank. 16. Hammer. 17. Back Check. 18. Damper Lever, leaded. 19. Damper Wire, screwed into upright. 20. Damper Wire Guide, fastened to Sound-Board. 21. Damper Head and Felt. 0. Center Pins. Holes lined with Bushing Cloth. - Lute, Elizabethan
Lute, Elizabethan The lute was made of various sizes according to the purpose for which it was intended in performance. The treble-lute was of the smallest dimensions, and the bass-lute of the largest. The theorbo, or double-necked lute which appears to have come into use during the sixteenth century, had in addition to the strings situated over the finger-board a number of others running at the left side of the finger-board which could not be shortened by the fingers, and which produced the bass tones. The largest kinds of theorbo were the archlute and the chitarrone. - Burgmote Horns
Beautiful horns of hammered and embossed bronze belonging to the Corporations of Canterbury and Dover. The right-hand one is from Dover, where it was formerly used for the calling together of the Corporation at the order of the mayor. The minutes of the town proceedings were constantly headed "At a common Horn blowing" (comyne Horne Blowying). This practice continued until the year 1670, and is not yet entirely done away with, as it is still blown on the occasion of certain Municipal ceremonies. The motto on this horn is:— JOHANNES DE · ALLEMAINE · ME · FECIT · preceded by the talismanic letters A·G·L·A, which stand for the Hebrew אַתָּה גִּבּוֹר לְעוֹלָם אֲדֹנָי and mean, "Thou art mighty for ever, O Lord!" The horn, which is 31¾ inches long, with a circumference at the larger end of 15½ inches, is of brass, and is deeply chased with a spiral scrollwork of foliage chiefly on a hatched ground. The inscription is on a band that starts four inches from the mouth and continues spirally. The maker's name is now nearly effaced, but the inscription shows that he was a German, and the date is assigned to the thirteenth century. - Oliphant
Olifant, or Hunting-horn, in Ivory (Fourteenth Century).--From an Original existing in England. - A Muse with a Harp, and two others with Lyres
A Muse with a Harp, and two others with Lyres. From a Greek vase in the Munich Museum The design on the Greek vase at Munich represents the nine Muses, of whom three are given in the engraving, viz., one with the harp, and two others with lyres. Some of the lyres were provided with a bridge, while others were without it. The largest was held probably on or between the knees, or were attached to the left arm by means of a band, to enable the performer to use his hands 30without impediment. The strings, made of catgut or sinew, were more usually twanged with a plektron than merely with the fingers. The plektron was a short stem of ivory or metal pointed at both ends. - Organistrum
The construction of the organistrum requires but little explanation. A glance at the finger-board reveals at once that the different tones were obtained by raising the keys placed on the neck under the strings, and that the keys were raised by means of the handles at the side of the neck. Of the two bridges shown on the body, the one situated nearest the middle was formed by a wheel in the inside, which projected through the sound-board. The wheel which slightly touched the strings vibrated them by friction when turned by the handle at the end. The order of intervals was c, d, e, f, g, a, b-flat, b-natural, c, and were obtainable on the highest string. There is reason to suppose that the other two strings were generally tuned a fifth and an octave below the highest. The organistrum may be regarded as the predecessor of the hurdy-gurdy, and was a rather cumbrous contrivance. Two persons seem to have been required to sound it, one to turn the handle and the other to manage the keys. Thus it is generally represented in mediæval concerts. - Double repetition action of Sebastian Erard as used by S. & P. Erard, Paris
1. Key. 2. Wippen. 3. Jack. 4. Escapement lever. 5. Hammer-shank. 6. Roller. 7. Hammer-head. 8. Jack regulating button. 9. Regulating button to limit rise of escapement lever. 10. Hammer-butt. 11. Check. 12. Felt cushion to engage with check. 13. Sticker connecting key and wippen. 14. Action-rails. 15. Damper-head. 16. Damper operating device. 17. Device to limit travel of jack. 18. String. 19. Spring (v-shaped) for escapement lever and jack. - Lamont Harp
The extreme length of the Lamont Harp is 38 inches, and the extreme width 18½ inches. The sound chest, as with other ancient harps, is hollowed out of one piece of wood, but the back has been in this instrument renewed, although probably a long time ago. The sound chest is 30 inches long, 4 inches in breadth at the top, and 17 at the bottom. The comb projects 15½ inches. The broken parts of the bow are held together by iron clamps. - English direct lever grand action, developed by Broadwood from Backers (1884)
1. Key. 2. Jack. 3. Jack operating spring. 4. Rail and cushion limiting travel of jack. 5. Button and screw regulating escapement of hammer. 6. Hammer-butt with operating notch. 7. Hammer-butt flange. 8. Hammer-shank. 9. Hammer-head. 10. Check. 13. Action-rails. - Huayra-puhura,
The Peruvians had the syrinx, which they called huayra-puhura. Some clue to the proper meaning of this name may perhaps be gathered from the word huayra, which signifies “air.” The huayra-puhura was made of cane, and also of stone. Sometimes an embroidery of needlework was attached to it as an ornament. One specimen which has been disinterred is adorned with twelve figures precisely resembling Maltese crosses. The cross is a figure which may readily be supposed to suggest itself very naturally; and it is therefore not so surprising, as it may appear at a first glance, that the American Indians used it not unfrequently in designs and sculptures before they came in contact with Christians. - Iron plate for upright pianoforte fitted with Capo D’astro bar
- Action by Andreas and Nanette (Stein), Streicher Viennese escapement (1794)
1. Key. 2. Jack. 3. Jack-operating spring. 4. Cushion limiting rebound of jack. 5. Button and screw regulating escapement of hammer. 6. Hammer-butt and operating face. 7. Hammer-butt pivot. 8. Hammer-shank. 9. Hammer-head. 10. Check. 11. Damper-lifter. 12. Damper-head. 13. Action-rails. - Cornemuse, Calabrian Bagpipe, Musette
The Calabrian Bagpipe or Zampogna is a rudely carved instrument of the eighteenth century. It has four drones attached to one stock, hanging downwards from the end of the bag: two of them are furnished with finger-holes. The reeds are double like those of the oboe and bassoon. The bag is large; it is inflated by the mouth and pressed by the left arm against the chest of the performer. The Zampogna is chiefly used as an accompaniment to a small reed melody pipe called by the same name, and played by another performer. The quality of the tone produced is not unpleasing. It has five holes only, and consequently the seventh of the scale is absent, but this can be easily got by octaving the open note of the pipe and covering part of the lower opening of the chanter with the little finger. The Musette, Zampogna, and Cornemuse here shown are from specimens belonging to Messrs. J. & R. Glen, Edinburgh. - The Erard grand action modified by Herz
1. Key. 2. Wippen. 3. Jack. 4. Escapement lever. 5. Hammer-shank. 6. Hammer-butt notch. 7. Hammer-head. 8. Jack regulating button. 9. Regulating button to limit rise of escapement lever. 10. Hammer-butt. 11. Check. 12. Molded tail of hammer-head to engage with check. 13. Capstan-screw connecting key and wippen. 14. Action-rails. 15. Damper-head. 16. Damper-operating device. 17. Device to limit travel of jack. 18. Regulating device for escapement lever. 19. Springs (2) for escapement lever and jack. 20. String. 21. Flange. - Cristofori’s action in its final form
1. Key. 2. Jack. 3. Jack-operating spring. 4. Cushion limiting rebound of jack. 5. Under-hammer. 6. Hammer-butt. 7. Hinge of hammer-butt. 8. Hammer-shank. 9. Hammer head. 10. Check. 11. Damper-lifter. 12. Damper-head. 13. Action-beam. 14. Wrest-plank. 15. Tuning pins. 16. Bearing-bridge. 17. String. - Girl arranging pussy willows
- Arrangement of iron plate, braces and scale of parlor size grand pianoforte
- Iron plate for upright pianoforte with Agraffes (Mehlin patents)
- Back view of upright pianoforte
Back view of upright pianoforte, Knabe patents, showing ribbing of sound-board and construction of back framing. - Upright action showing lost-motion device
Upright action showing lost-motion device, metallic regulating rail support, capstan screw, jack regulating rail and metallic action brackets. 34. Hammer-rail lifter-wire. 35. Hammer-rail swing-lever. 36. Hammer-rail lifter rod. 37. Lifter-rod lever. 38. Compensation-lever. 39. Capstan-screw. 40. Rail for limiting return movement of jack. 41. Metallic regulating rail support. - Jonas Chickering’s full solid cast grand metal plate
- Grand pianoforte action with metallic action and damper frames
Grand pianoforte action with metallic action and damper frames, sostenuto pedal device and hammer swinging soft pedal attachment. 22. Sostenuto pedal-rod. 23. Attachment to damper-lever engaging with sostenuto pedal-rod. 24. Metallic action and damper-brackets. 25. Hammer swing-rail and cushion. 26. Hammer swing-rail rod. 27. Hammer swing-rail lifter. 28. Lifter-rod. 29. Lost motion compensating levers. 30. Lost motion compensating levers. - Sketch of iron plate for concert grand
Sketch of iron plate for concert grand, showing general arrangement of braces, belly-bridges and system of bolts for fastening to case. A—B. Hammer line. 1. Body of plate. 2. Bass bridge. 3. Continuous treble bridge. 4. Agraffes. 5. Capo d’astro bar. Plate is cast in one piece and scale is overstrung. - Modern method og grand pianoforte case construction
A. Continuous bent rim. B. Wooden struts. C. Iron shoe holding struts and connecting with iron plate. D. Main beam. - Standard modern American grand action
1. Key. 2. Wippen. 3. Jack. 4. Escapement lever. 5. Hammer-shank. 6. Roller. 7. Hammer-head. 8. Jack-regulating button. 9. Regulating button to limit rise of escapement lever. 10. Hammer-butt. 11. Check. 12. Molded tail of hammer-head to engage with check. 13. Key-rocker and sticker connecting wippen and key. 14. Action-rails. 15. Damper-head. 16. Damper operating device. 17. Device to limit travel of jack. 18. Regulating device for escapement lever. 19. Separate springs for jack and escapement lever. 20. String. 21. Flanges.