Velocipede for Ladies
We present a bicycle for ladies, lately invented and patented by Messrs. Pickering & Davis of New York City. It will be seen that the reach or frame, instead of forming a nearly straight line from the front swivel to the hind axle, follows the curve of the front wheel until it reaches a line nearly as low as the hind axle when it runs horizontally to that point of the hind wheel. The two wheels being separated three or four inches, allow of an upright rod being secured to the reach; around this is a spiral spring, on which a comfortable, cane-seated, willow-backed chair is placed. This machine, with a moderate-sized wheel (of thirty to thirty-three inches), will allow being driven with a great deal of comfort and all the advantages of the two-wheel veloce. In mounting, a lady has to step over the reach, at a point only twelve inches from the floor, the height of an ordinary step in a flight of stairs.
The Bicycle
Of the various kinds of velocipedes, four, three, two, and one wheeled, the bicycle seems to be considered the most artistic, is altogether the most in favor, and steadily maintains its ground against all rivals. Whether it will be the model velocipede of the future remains to be seen. The various experiments now being tried will, no doubt, eventually result in a nearly perfect machine, but it will require a season's experience fully to develop the ingenuity of our American artisans. Many have expressed doubts as to the real utility of the velocipede, and the permanency of its use. They seem to think it a frivolous invention only calculated to serve purposes of amusement, and soon to be superseded by some other ephemeral claimant for popularity. Most of these have based their opinions upon the disuse into which rude machines have fallen in former times. But the difference in the construction of the modern velocipede from the primitive one has entirely changed the character of the vehicle. It is no longer a draft vehicle, but a locomotive, and as much superior to the original bar on wheels, as the improved steam locomotive is to the old-time stage-coach.
Synnestvedt 2-Ton Truck
Synnestvedt 2-Ton Truck. Synnestvedt Machine Co., Pittsburgh, Pa. BODY: Stake or van CAPACITY: 2 tons WHEEL-BASE: 87 inches TREAD: 52 inches TIRES, FRONT: 36 × 4 in. TIRES, REAR: 36 × 5 in. BRAKES: On rear wheel and driving shaft SPRINGS: Platform FRAME: Channel steel MOTOR: Synnestvedt electric MOTOR SUSPENSION: In rear under body SPEEDS: 4 forward, 2 reverse DRIVE: Chain
Sovereign, Model M
Sovereign, Model M. Matthews Motor Co., Camden, N. J. BODY: Side entrance tonneau SEATS: 8 persons WHEEL-BASE: 124 inches TREAD: 56 inches TIRES, FRONT: 36 × 4 inches TIRES, REAR: 36 × 5 inches BRAKES: 2 double internal on rear hubs SPRINGS: Semi-elliptic, front; platform type rear FRAME: Pressed steel BORE: 5½ in.; STROKE: 6 in. CYLINDERS: 4 vertical MOTOR SUSPENSION: From frame COOLING: Water IGNITION Jump spark (double plugs) CURRENT SUPPLY: Magneto and batteries CARBURETER: Automatic LUBRICATION: Mechanical pump MOTOR-CONTROL: Spark and throttle CHANGE GEAR: Sliding type SPEEDS: 4 forward and reverse CHANGE-GEAR CONTROL: Side lever DRIVE: Double side chain
R & L Stanhope
R & L Stanhope. Rauch and Lang Carriage Co., Cleveland, Ohio PRICE: $1,850 BODY: Stanhope SEATS: 2 persons WEIGHT: 1,600 pounds WHEEL-BASE: 73 inches TIRES, FRONT: 32 in., pneumatic TIRES, REAR: 32 in., pneumatic STEERING: Side lever BRAKES: On rear wheels and emergency SPRINGS: Semi-elliptic front; full elliptic rear FRAME: Steel HORSE-POWER: 1½ MOTOR: Hertner MOTOR SUSPENSION: Under body SPEED: 1–22 m. p. h. DISTANCE: 75 to 80 miles MOTOR-CONTROL: Lever at left of seat DRIVE: Double chain from countershaft
Pickering's American Velocipede
As will be seen from the accompanying engraving, "Pickering's American Velocipede," manufactured by Messrs. Pickering & Davis, differs very materially from the French model, so generally used by other manufacturers. It is claimed that it is more simple and durable, lighter and stronger. The reach or frame of this velocipede is made of hydraulic tubing. The gun-metal bearings are so attached that, when worn, they may be replaced by others, which are interchangeable like the parts of sewing-machines and fire-arms. The axle is so constructed as to constitute, in itself, an oil box. It is made tubular, and closed at either end with a screw, on the removal of which it is filled with lard oil. Cotton lamp-wick is placed loosely in the tubular axle and the oil is by this means fed to the bearing, as fast as required, through the small holes made for the purpose in the centre of the axle. The saddle is supported on a spiral spring, giving an elastic seat; it is brought well back, so that the rider maintains an erect position, and is adjustable to suit the length of limb of the rider. The tiller or steering handle is constructed with a spring so that the hands are relieved from the jolting that they would otherwise receive while running over rough ground. The stirrups or crank pedals, are three-sided, with circular flanges at each end, fitted to turn on the crank pins, so that the pressure of the foot will always bring one of the three sides into proper position. They are so shaped as to allow of the use of the forepart of the foot, bringing the ankle joint into play, relieving the knee, and rendering propulsion easier than when the shank of the foot alone is used. The connecting apparatus differs from that of the French vehicle in that the saddle bar serves only as a seat and brake, and is not attached to the rear wheel. By a simple pressure forward against the tiller, and a backward pressure against the tail of the saddle, the saddle spring is compressed, and the brake attached to it brought firmly down against the wheel. Messrs. Pickering & Davis have a large manufactory, and are the constant recipients of orders from all parts of the country. Mr. Pickering has always been a practical machinist, and personally superintends the structure of each machine turned out.
Pennsylvania, 35 H.P. Pennsylvania Auto Motor Co., Phil., Pa.
PRICE: $2,800 BODY: Mercedes SEATS: 5 persons WEIGHT: 2,550 pounds WHEEL-BASE: 111 inches TREAD: 56 inches TIRES, FRONT: 34 × 4 in. TIRES, REAR: 34 × 4 in. STEERING: Worm and nut BRAKES: Double on rear wheels SPRINGS: Front, 40 in. long; Rear, platform type FRAME: Pressed steel BORE: 4½ in.; STROKE: 5 in. CYLINDERS: 4 vertical, cast separate VALVE ARRANGEMENT: Same side MOTOR SUSPENSION: Direct from sub-frame COOLING: Water; cellular radiator IGNITION: Jump spark CURRENT SUPPLY: Storage battery CARBURETER: Schebler LUBRICATION: Force feed MOTOR-CONTROL: Spark and throttle CLUTCH: Cone CHANGE GEAR: Sliding type SPEEDS: 3 forward and reverse CHANGE-GEAR CONTROL: Selective system DRIVE: Shaft
Man and wife about to go away in the bridal car
Man and wife about to go away in the bridal car
Hill Touring Car, 35 H.P
Hill Touring Car, 35 H.P. Hill Motor Car Co., Haverhill, Mass. PRICE: $3,000 BODY: Side entrance tonneau SEATS: 5 persons WEIGHT: 2,200 pounds TIRES, FRONT: 32 × 4 inches TIRES, REAR: 32 × 4 inches BRAKES: On rear wheel drums SPRINGS: Full elliptic FRAME: Pressed steel BORE: 4½ in.; STROKE: 5 in. CYLINDERS: 4 vertical cast separately VALVES: Mechanically operated MOTOR SUSPENSION: Direct from frame COOLING: Air IGNITION: Jump spark CURRENT SUPPLY: Storage battery CARBURETER: Float-feed automatic LUBRICATION: Automatic MOTOR-CONTROL: Hand or foot CLUTCH: Multiple disc CHANGE GEAR: Sliding type SPEEDS: 3 forward and reverse CHANGE-GEAR CONTROL: Side lever DRIVE: Bevel gear
Hercules, Model 144
Hercules, Model 144. James Macnaughtan Co., Buffalo, N. Y. PRICE: $1,700 BODY: Heavy platform truck CAPACITY: 6,000 pounds WEIGHT: 3,525 pounds WHEEL-BASE: 73½ inches TREAD: 37⅜ inches TIRES, FRONT: 20 × 4 × ⅜ in. steel TIRES, REAR: 20 × 4 × ⅜ in. steel STEERING: Irreversible worm type BRAKES: Electric on motors SPRINGS: No springs MOTORS: Single equipment MOTOR SUSPENSION: From body MOTOR-CONTROL: Westinghouse CHANGE SPEEDS: 3 speeds forward and reverse DRIVE: Double chain
Hercules, Model 139
Hercules, Model 139. James Macnaughtan Co., Buffalo, N. Y. PRICE: $2,250 BODY: Express wagon CAPACITY: 2,000 pounds WEIGHT: 3,200 pounds TIRES, FRONT: 34 × 3½ inches TIRES, REAR: 36 × 4 inches STEERING: Horizontal side lever BRAKES: Internal expanding hub SPRINGS: Front, half platform; rear, full elliptic MOTORS: Single equipment MOTOR SUSPENSION: From body DISTANCE: 50 miles MOTOR-CONTROL: Westinghouse SPEED: 9 m.p.h. CHANGE SPEEDS: 4 speeds ahead and reverse DRIVE: Double chain
Hercules, Model 128
Hercules, Model 128. James Macnaughtan Co., Buffalo, N. Y. PRICE: $4,400 BODY: Stake platform with top CAPACITY: 10,000 pounds WEIGHT: 8,700 pounds WHEEL-BASE: 117 inches TREAD: 83 inches TIRES, FRONT: 36 × 7 inches TIRES, REAR: 36 × 7 inches STEERING: Pinion and sector type BRAKES: Internal expanding hub SPRINGS: Semi-elliptic MOTORS: Double equipment MOTOR SUSPENSION: From body MOTOR-CONTROL: Westinghouse CHANGE SPEEDS: 4 forward and reverse DRIVE: Double chain
Hercules, Model 121
Hercules, Model 121. James Macnaughtan Co., Buffalo, N. Y. PRICE: $3,200 BODY: Delivery truck CAPACITY: 4,000 pounds WEIGHT: 6,000 pounds WHEEL-BASE: 103 inches TREAD: 72 inches TIRES, FRONT: 36 × 4 inches TIRES, REAR: 38 × 4 inches STEERING: Pinion and sector type BRAKES: Internal expanding hub SPRINGS: Half platform front and rear MOTORS: Double equipment MOTOR SUSPENSION: From body MOTOR-CONTROL: Westinghouse SPEED: 8½ m.p.h. CHANGE SPEEDS: 4 forward and reverse DISTANCE: 38 miles DRIVE: Double chain NOTE: With slight changes in price and specifications these trucks range in capacity up to 10,000 pounds: bodies to order
Hercules, Model 120
Hercules, Model 120. James Macnaughtan Co., Buffalo, N. Y. PRICE: $1,750 BODY: Delivery wagon (closed) CAPACITY: 1,000 pounds WEIGHT: 2,300 pounds TIRES, FRONT: 34 × 2½ inches TIRES, REAR: 36 × 2½ inches STEERING: Side bar BRAKES: Band brakes on rear axle SPRINGS: Front, elliptic; rear, platform MOTORS: Double equipment MOTOR SUSPENSION: From body MOTOR-CONTROL: Westinghouse SPEEDS: 4 speeds ahead and reverse DRIVE: Double chain
Hercules, Model 113
Hercules, Model 113. James Macnaughtan Co., Buffalo, N. Y. PRICE: $3,750 BODY: Platform truck CAPACITY: 7,000 pounds WEIGHT: 7,500 pounds WHEEL-BASE: 118 inches TREAD: 70 inches TIRES, FRONT: 36 × 5 inches TIRES, REAR: 38 × 5 inches STEERING: Pinion and sector type BRAKES: Internal expanding hub SPRINGS: Semi-elliptic MOTORS: Double equipment MOTOR SUSPENSION: From body SPEED: 8 m.p.h. MOTOR-CONTROL: Westinghouse DISTANCE: 30 miles CHANGE SPEEDS: 4 forward and reverse DRIVE: Double chain
Hercules, Model 106
Hercules, Model 106. James Macnaughtan Co., Buffalo, N. Y. PRICE: $2,350 BODY: Open delivery CAPACITY: 1,500 pounds WEIGHT: 3,500 pounds WHEEL-BASE: 77 inches TREAD: 65 inches TIRES, FRONT: 36 × 3 inches TIRES, REAR: 39 × 3½ inches STEERING: Irreversible type BRAKES: Internal expanding hub SPRINGS: Front, semi-elliptic; rear, half platform MOTORS: Double equipment MOTOR SUSPENSION: From body MOTOR-CONTROL: Westinghouse CHANGE SPEEDS: 4 forward and reverse DRIVE: Double chain
Hercules, Model 103
Hercules, Model 103. James Macnaughtan Co., Buffalo, N. Y. PRICE: $3,000 BODY: Delivery wagon with top CAPACITY: 3,000 pounds WEIGHT: 5,400 pounds WHEEL-BASE: 111 inches TREAD: 65½ inches TIRES, FRONT: 36 × 4 inches TIRES, REAR: 36 × 4 inches STEERING: Irreversible worm type BRAKES: Internal expanding hub SPRINGS: Half platform front and rear MOTORS: Double equipment MOTOR SUSPENSION: From body SPEED: 10 m.p.h. DISTANCE: 45 miles MOTOR-CONTROL: Westinghouse CHANGE SPEEDS: 4 forward and reverse DRIVE: Double chain
Hercules, Model 102
Hercules, Model 102. James Macnaughtan Co., Buffalo, N. Y. PRICE: $2,000 BODY: Delivery wagon (closed) CAPACITY: 800 pounds WEIGHT: 2,576 pounds TIRES, FRONT: 34 × 2 inches TIRES, REAR: 36 × 2 inches STEERING: Horizontal side lever BRAKES: Internal expanding hub SPRINGS: Front, half platform; rear, full elliptical MOTORS: Single equipment MOTOR SUSPENSION: From body MOTOR-CONTROL: Westinghouse SPEED: 12 m.p.h. CHANGE SPEEDS: 4 forward and reverse DISTANCE: 40 miles DRIVE: Double chain
Hercules, Model 101
Hercules, Model 101. James Macnaughtan Co., Buffalo, N. Y. PRICE: $2,000 BODY: Closed delivery wagon CAPACITY: 1,000 pounds WEIGHT: 2,700 pounds TIRES, FRONT: 34 × 2 inches TIRES, REAR: 36 × 2 inches STEERING: Horizontal side lever BRAKES: Internal expanding hub SPRINGS: Front, half platform; rear, full elliptical MOTORS: Single equipment MOTOR SUSPENSION: From body MOTOR-CONTROL: Westinghouse CHANGE SPEEDS: 4 forward and reverse DRIVE: Double chain
Hercules, Model 140
Hercules, Model 140. James Macnaughtan Co., Buffalo, N. Y. PRICE: $2,350 BODY: Piano box SEATS: 2 or 4 persons CAPACITY: 1,500 pounds WEIGHT: 3,300 pounds TIRES, FRONT: 36 × 3 inches TIRES, REAR: 39 × 3½ inches STEERING: Irreversible type BRAKES: Internal expanding hub SPRINGS: Full elliptic MOTORS: Double equipment MOTOR SUSPENSION: From body MOTOR-CONTROL: Westinghouse SPEEDS: 4 ahead and reverse DRIVE: Double chain
Gearless, 75 H.P
Gearless, 75 H.P. Gearless Transmission Co., Rochester, N. Y. PRICE: $3,750 BODY: Side entrance tonneau SEATS: 7 persons WEIGHT: 3,000 pounds WHEEL-BASE: 128 inches TREAD: 56 inches TIRES, FRONT: 36 × 4 inches TIRES, REAR: 36 × 4½ inches STEERING: Worm and nut BRAKES: On transmission and 2 on each rear hub SPRINGS: Semi-elliptical FRAME: Pressed steel BORE: 413/16 in.; STROKE: 5⅝ in. CYLINDERS: 6 vertical in front VALVE ARRANGEMENT: Inlet and exhaust in side ports MOTOR SUSPENSION: From sub-frame COOLING: Water IGNITION: Jump spark, 2 sets of plugs CURRENT SUPPLY: Storage battery and magneto CARBURETER: Float-feed LUBRICATION: Pump driven by gears MOTOR-CONTROL: Spark and throttle CLUTCH: Expanding ring CHANGE GEAR: Gearless 1907 model, direct drive SPEEDS: 2 forward and reverse CHANGE-GEAR CONTROL: Foot pedal for forward speeds; side lever for back up DRIVE: Shaft
Gearless, 60 H.P
Gearless, 60 H.P. Gearless Transmission Co., Rochester, N. Y. PRICE: $3,250 BODY: Side entrance tonneau SEATS: 5 persons WEIGHT: 2,800 pounds WHEEL-BASE: 124 inches TREAD: 56 inches TIRES, FRONT: 36 × 4 inches TIRES, REAR: 36 × 4 inches STEERING: Worm and nut BRAKES: On transmission and rear hubs SPRINGS: Semi-elliptical FRAME: Pressed steel BORE: 5 in.; STROKE: 5 in. CYLINDERS: 4 vertical in front, 2 cycle MOTOR SUSPENSION: From sub-frame COOLING: Water IGNITION: Double jump spark CURRENT SUPPLY: Magneto and battery CARBURETER: Float-feed LUBRICATION: Mechanical force feed MOTOR-CONTROL: Spark and throttle CLUTCH: Expanding ring CHANGE GEAR: Gearless direct drive SPEEDS: 2 forward and reverse CHANGE-GEAR CONTROL: Side lever and foot pedal DRIVE: Shaft
Gearless, 50 H.P
Gearless, 50 H.P. Gearless Transmission Co., Rochester, N. Y. PRICE: $3,000 BODY: Side entrance tonneau SEATS: 5 persons WEIGHT: 2,600 pounds WHEEL-BASE: 124 inches TREAD: 56 inches TIRES, FRONT: 36 × 4 inches TIRES, REAR: 36 × 4 inches STEERING: Worm and nut BRAKES: On transmission and two on each rear hub SPRINGS: Semi-elliptical FRAME: Pressed steel BORE: 4⅝ in.; STROKE: 5 in. CYLINDERS: 4, vertical in front; two cycle MOTOR SUSPENSION: From sub-frame COOLING: Air jackets. Blower; copper fins cast on cylinders IGNITION: Jump spark CURRENT SUPPLY: Storage battery and dry cells CARBURETER: Float-feed LUBRICATION: Mechanical force feed oiler MOTOR-CONTROL: Spark and throttle CLUTCH: Expanding ring CHANGE GEAR: Gearless 1907 model, direct drive SPEEDS: 2 forward and reverse CHANGE-GEAR CONTROL: Foot pedal for forward speeds; ride lever for reverse DRIVE: Shaft
Frontenac, Model C, 40 H.P
Frontenac, Model C, 40 H.P. Abendroth & Root Mfg. Co., Newburgh, N. Y. PRICE: $3,500 BODY: Side entrance tonneau SEATS: 5 to 7 persons WEIGHT: 2,800 pounds WHEEL-BASE: 123 inches TREAD: 56 inches TIRES, FRONT: 34 × 4 inches TIRES, REAR: 34 × 4½ inches STEERING: Bevel gear connecting to worm and nut BRAKES: Internal and external on rear wheels BORE: 4¾ in.; STROKE: 5 in. SPRINGS: Semi-elliptical FRAME: Pressed steel CYLINDERS: 4, vertical in pairs VALVE ARRANGEMENT: On same side MOTOR SUSPENSION: From sub-frame COOLING: Water, fin tube radiator IGNITION: Jump spark CURRENT SUPPLY: Storage battery and magneto CARBURETER: Automatic LUBRICATION: Splash MOTOR-CONTROL: Spark and throttle CHANGE GEAR: Sliding type SPEEDS: 3 forward and reverse CHANGE-GEAR CONTROL: Selective system DRIVE: Shaft
Frontenac Runabout, Model D, 40–45 H.P
Frontenac Runabout, Model D, 40–45 H.P. Abendroth and Root M'f'g. Co., Newburgh, N. Y. PRICE: $3,500 BODY: Runabout SEATS: 3 persons WEIGHT: 2,500 pounds WHEEL-BASE: 123 inches TREAD: 56 inches TIRES, FRONT: 36 × 3½ in. TIRES, REAR: 36 × 4½ in. STEERING: Bevel gear and shaft connecting to worm and nut BRAKES: External and internal on rear wheels SPRINGS: Semi-elliptical FRAME: Pressed steel BORE: 4¾ in.; STROKE: 5 in. CYLINDERS: 4 vertical, in pairs VALVE ARRANGEMENT: On one side MOTOR SUSPENSION: Sub-frame COOLING: Water; fin tube radiator IGNITION: Jump spark (double) CURRENT SUPPLY: Magneto and battery CARBURETER: Automatic float-feed LUBRICATION: Splash MOTOR-CONTROL: Spark and throttle CHANGE GEAR: Sliding type SPEEDS: 3 forward and reverse CHANGE-GEAR CONTROL: Selective system DRIVE: Shaft
Flying Yankee Velocipede
HEMMING'S UNICYCLE, or "FLYING YANKEE VELOCIPEDE." The single-wheeled velocipede has at length received a palpable body, and " a local habitation and a name." Richard C. Hemming of New Haven, Conn., invented the machine herewith represented, two years ago; but has only recently brought it into the market and applied it to practical purposes.. The main wheel has a double rim, or has two concentric rims, the inner face of the inner one having a projecting lip for keeping the friction rollers and the friction driver in place; each of these being correspondingly grooved on their peripheries. The frame on which the rider sits, sustains these friction wheels in double parallel arms, on the front one of which is mounted a double pulley, with belts passing to small pulleys on the axis of the driving wheel. This double wheel driven, as seen, by cranks turned by the hands. The friction of the lower wheel on the surface of the inner rim of the main wheel is the immediate means of propulsion. A small binding wheel, seen between the rider's legs, serves to keep the bands or belts tight. The steering is effected either by inclining the body to one side or the other, or by the foot impinging on the ground, the stirrups being hung low for this purpose. By throwing the weight on these stirrups, the binding wheel may be brought more powerfully down on the belts. Over the rider's head is an awning, and there is also a shield in front of his body to keep the clothes from being soiled by mud and wet. When going forward, the driving wheel is kept slightly forward of the centre of gravity by the position of the rider. By this means the power exerted is comparatively small. Every turn of the crank is equivalent to a rotation of the great wheel. Mr. Hemming says that this machine can be manufactured for fifty dollars, of a weight of only thirty pounds;- that it will ascend steep grades, and that it can be driven on the roads with but little exertion, at the rate of twenty or even twenty-five miles an hour. This wheel is of a diameter of from six to eight feet. Mr. Hemming's boy of thirteen has one five feet in diameter, the first manufactured, crude in construction, and heavier than necessary, which he propels at the rate of a mile in three minutes.
English one-wheeled Velocipede
We present an engraving of an English one-wheeled velocipede. The feet are placed on short stilts, connected with the cranks, one on either side of the rim, while the rider sits upon a steel spring saddle over the whole wheel. The inventor modestly limits the diameter of the wheel to twelve feet, and the number of revolutions to fifty per minute. Twenty-five miles per hour is the speed expected to be reached. The riders of this machine, without the ability to overcome the laws of gravity, would be very likely to get broken bones and noses. It is not likely to come into general use.
Covert Commercial Car, 12 H.P
Covert Commercial Car, 12 H.P. Covert Motor Vehicle Co., Lockport, N. Y. PRICE: $1,000 BODY: Express (screen sides) CAPACITY: 1,000 pounds WEIGHT: 1,500 pounds WHEEL-BASE: 84 inches TREAD: 56 inches TIRES, FRONT: 32 × 2 inches TIRES, REAR: 32 × 2 inches SPRINGS: Full elliptic CYLINDERS: Double opposed MOTOR SUSPENSION: From side members of frame, under seat COOLING: Water; cellular radiator IGNITION: Jump spark CURRENT SUPPLY: Batteries CHANGE GEAR: Sliding type CHANGE-GEAR CONTROL: Side lever DRIVE: Shaft and bevel gears
Construction of the Bicycle
The accompanying engraving will convey to the mind of the reader a correct idea of the French two-wheeled velocipede. The majority of makers in this country fashion their machine upon this pattern in every essential respect. We append a full technical description. A is the front wheel. This is the steering wheel, and upon its axis, the power is applied. B is the hind wheel; C, the treadles or foot-pieces ; D, the treadle cranks; E, slots in cranks, by which to adjust the foot-pieces and accommodate the length to the legs of the rider; F, bifurcated jaw, the lower part of which forms the bearing for the axle of the front wheel. From the upper part of this jaw, a rod or pivot extends, to which is attached the steering arm or handle F; G, the reach or perch, extending from the jaw of the front wheel to the rear or hind wheel. This reach is bifurcated, forming jaws for the hind wheel. H, " rests" on the front part of the reach. The rider puts one leg on the rest and works one of the cranks with the other leg while riding " side-saddle," or a leg may be placed upon each rest when the velocipede has acquired sufficient momentum, and the rider does not wish to keep his feet upon the treadles. I, the saddle or seat, which is adjustable on the seat-spring L, by the thumb-screw K. The seat-spring L, is attached at M to the reach G, which, at the other end, is fastened to the spring-struts N, that rise from the reach G; 0, the brake-lever, on the fulcrum P; Q,, the " shoe " of the brake that acts against the periphery of the hind wheel. The brake is operated by means of the cord S, one end of which is attached to the steering handle F, and the other end to the reach at 3. A cord passes from the steering handle under the pulley or roller 4, thence over the pulley 5, on the brake-lever 0, and from there to the point 3, where it is attached to the reach G. The brake is operated by giving a slight turning motion to the handle F, thus winding a small sheave upon the axis of the handle, and bring-ing the shoe Q, of the brake-lever 0, in contact with the surface of the wheel B.
Chicago Truck with Winch
Chicago Truck with Winch. Chicago Commercial Auto Mfg. Co., Chicago, Ill. BODY: Platform truck with winch CAPACITY: 5 tons WHEEL-BASE: 126 inches TREAD: 64 inches TIRES, FRONT: 36 inches, solid rubber TIRES, REAR: 36 inches, solid rubber STEERING: Vertical column BRAKES: On transmission and rear hubs SPRINGS: Platform type FRAME: Steel BORE: 6 inches STROKE: 6 inches CYLINDERS: 4, cast separate VALVE ARRANGEMENT: In cylinder heads, operated from one side MOTOR SUSPENSION: Under driver's seat COOLING: Water IGNITION: Jump spark CURRENT SUPPLY: Batteries or magneto CARBURETER: Float-feed type LUBRICATION: Forced feed oiler MOTOR-CONTROL: Spark and throttle CLUTCH: Cast steel bands with graphite inserts CHANGE GEAR: Sliding type SPEEDS: 3 forward and reverse CHANGE-GEAR CONTROL: Side lever DRIVE: Double side chain
Chicago Combination Pass. & Bagg. Car
Chicago Combination Pass. & Bagg. Car. Chicago Commercial Auto Mfg. Co., Chicago, Ill. BODY: Passenger and baggage car SEATS: 16 persons WHEEL-BASE: 126 inches TREAD: 64 inches TIRES, FRONT: 36 inches, solid rubber TIRES, REAR: 36 inches, solid rubber BRAKES: On transmission shaft and rear wheels SPRINGS: Platform type FRAME: Steel BORE: 6 inches STROKE: 6 inches CYLINDERS: 4 vertical, separate VALVE ARRANGEMENT: In cylinder heads, on same side MOTOR SUSPENSION: Under seat COOLING: Water IGNITION: Jump spark CURRENT SUPPLY: Batteries or magneto CARBURETER: Float-feed LUBRICATION: Mechanical force feed MOTOR-CONTROL: Spark and throttle CLUTCH: Cast steel band with graphite inserts CHANGE GEAR: Sliding type SPEEDS: 3 forward and reverse CHANGE-GEAR CONTROL: Side lever DRIVE: Side chains
Chicago Coal or Gravel Truck
Chicago Coal or Gravel Truck. Chicago Commercial Auto Mfg. Co., Chicago, Ill. BODY: Tilting CAPACITY: 5 tons WHEEL-BASE: 126 inches TREAD: 64 inches TIRES, FRONT: 36 inches, solid rubber TIRES, REAR: 36 inches, solid rubber BRAKES: On transmission shaft and rear hubs SPRINGS: Platform type FRAME: Steel BORE: 6 inches STROKE: 6 inches CYLINDERS: 4, cast separate VALVE ARRANGEMENT: in cylinder heads on same side MOTOR SUSPENSION: Under seat COOLING: Water IGNITION: Jump spark CURRENT SUPPLY: Batteries or magneto CARBURETER: Float-feed type LUBRICATION: Mechanical force feed MOTOR-CONTROL: Spark and throttle CLUTCH: Cast steel bands with graphite inserts CHANGE GEAR: Sliding type SPEEDS: 3 forward and reverse CHANGE-GEAR CONTROL: Side lever DRIVE: Side chains
Chicago 6-Ton Coal Truck
Chicago 6-Ton Coal Truck. Chicago Commercial Auto Mfg. Co., Chicago, Ill. BODY: Side delivery CAPACITY: 12,000 pounds WHEEL-BASE: 126 inches TREAD: 64 inches TIRES, FRONT: 36 inches, solid rubber TIRES, REAR: 36 inches, solid rubber STEERING: Vertical column BRAKES: On transmission shaft and rear wheels SPRINGS: Platform type FRAME: Steel BORE: 6 inches STROKE: 6 inches CYLINDERS: 4, cast separate VALVE ARRANGEMENT: In cylinder heads, operated from one side MOTOR SUSPENSION: Under cab COOLING: Water IGNITION: Jump Spark CURRENT SUPPLY: Batteries or magneto CARBURETER: Float-feed type LUBRICATION: Mechanical force feed MOTOR-CONTROL: Spark and throttle CLUTCH: Cast steel bands with graphite inserts CHANGE GEAR: Sliding type SPEEDS: 3 forward and reverse CHANGE-GEAR CONTROL: Side lever DRIVE: Side chains
Chicago 6-Ton Coal Truck
Chicago 6-Ton Coal Truck. Chicago Commercial Auto Mfg. Co., Chicago, Ill. BODY: End delivery CAPACITY: 12,000 pounds WHEEL-BASE: 126 inches TREAD: 64 inches TIRES, FRONT: 36 inches, solid rubber TIRES, REAR: 36 inches, solid rubber STEERING: Vertical column BRAKES: On transmission shaft and rear hubs SPRINGS: Platform type FRAME: Steel BORE: 6 inches STROKE: 6 inches CYLINDERS: 4, cast separate VALVE ARRANGEMENT: In cylinder heads, operated from one side MOTOR SUSPENSION: Under driver's cab COOLING: Water IGNITION: Jump spark CURRENT SUPPLY: Batteries or magneto CARBURETER: Float-feed type LUBRICATION: Mechanical force feed MOTOR-CONTROL: Spark and throttle CLUTCH: Cast steel bands with graphite inserts CHANGE GEAR: Sliding type SPEEDS: 3 forward and reverse CHANGE-GEAR CONTROL: Side lever DRIVE: Side chains
Chase 2-Ton Truck, Model I, 30–40 H.P
Chase 2-Ton Truck, Model I, 30–40 H.P. Chase Motor Truck Co., Syracuse, N.Y. PRICE: $3,500 BODY: Express, stake cart or bus CAPACITY: 4,000 pounds WEIGHT: 3,500 pounds WHEEL-BASE: 108 inches TREAD: 56 inches TIRES, FRONT: 36 × 4 in. solid TIRES, REAR: 36 x 3 in. twin solid STEERING: Nut and screw BRAKES: Transmission and rear wheel hub SPRINGS: Front full elliptic, rear semi-elliptic FRAME: Wood BORE: 4½ in.; STROKE: 5 in. CYLINDERS: 4 vertical in front VALVE ARRANGEMENT: 2 cycle; no valves in cylinders MOTOR SUSPENSION: From side of frame COOLING: Forced air IGNITION: Jump spark CURRENT SUPPLY: Storage battery CARBURETER: Automatic LUBRICATION: Automatic MOTOR-CONTROL: Spark and throttle CLUTCH: Cone, cork inserts CHANGE GEAR: Sliding type SPEEDS: 3 forward speeds and reverse CHANGE-GEAR CONTROL: Side lever DRIVE: Side chains
Callihan's Velocipede
This velocipede was patented January 5th, 1869. It has been thoroughly tested and is pronounced a complete success. It will be seen that it is very different from Bradford's machine. The front wheels are used as guiding wheels, the rear as the driving ones. It is propelled by both hands and feet, acting together or separately. The propelling power is almost unlimited, and is furnished by cranks in the hind axles, with lever attachments. It has three different steering arrangements, either of which can be applied, according to the taste of the purchaser. In all these, the forward wheel and axle are turned with a lever arrangement, operated upon by the band. The machine develops both chest and limbs, and can be readily used by ladies and children. A little girl of six years has ridden it for an hour without fatigue. It is so constructed, that scruples of delicacy need prevent no lady from driving it. It can be driven either backwards or forwards, will run upon the road, at the rate of fifteen miles an hour, and will ascend any ordinary hill with ease. It is claimed, that it is the only machine made that can be checked in going down hill, or that can be stopped instantly. The machine varies in size and weight. That most in favor, has a wheel of three feet and a half in diameter, and a weight of about one hundred pounds. It is constructed of the best material, and is neat and nobby in appearance. Its price is $125.
Buggyabout, Model C, 14 H.P
"Buggyabout," Model C, 14 H.P. Hatfield Motor Vehicle Co., Cortland, N. Y. PRICE: $750 BODY: Piano box convertible to commercial wagon SEATS: 4 persons WEIGHT: 900 pounds WHEEL-BASE: 101 inches TREAD: 56 inches TIRES, FRONT: 38 × 1½ inches TIRES, REAR: 42 × 1½ inches STEERING: Chain and sprocket (patented) BRAKES: 2 on differential sprockets, 2 emergency SPRINGS: Full elliptical FRAME: Wood sill, reinforced by angle iron BORE: 4½ in.; STROKE: 4 in. CYLINDERS: 2 opposed VALVE ARRANGEMENT: Automatic intake; mechanical exhaust MOTOR SUSPENSION: From sills COOLING: Air IGNITION: Jump spark CURRENT SUPPLY: Dry cells CARBURETER: Schebler LUBRICATION: Gravity feed MOTOR-CONTROL: Spark and throttle CLUTCH: None SPEEDS: 3 to 25 miles DRIVE: Friction drive (patented)
Bradford's Velocipede
If any of our readers desire the luxury of a ride on a velocipede without the necessity of taking lessons, or the danger of getting a fall, they will find " Bradford's Four-Wheeled Velocipede" ready and able to afford them the pleasure. The inventor of this vehicle, Mr. C. K. Bradford, has devoted the greater part of the last five years to experiments upon the velocipede, and took out his first patent three years and a half ago. The machine, as now constructed and improved, obtained its American patent October 13th, 1868. It has since been patented in England, France, and Belgium. It is made of the best material, and finished like a gentleman's trotting wagon. It weighs but sixty-five pounds, and combines in a high degree both lightness and strength. Any man, woman or child, can learn to guide it easily with but a few moments practice. The inventor claims that it is able to maintain a speed of a mile in three minutes, and that the extraordinary time of a half mile in one minute and forty-five seconds, has been made upon a country road. It can be driven by almost any man, at the rate of a mile in four minutes, on almost any road, without greater exertion than is ordinarily used in walking. This velocipede, unlike all others, is seen to best advantage on the street. In Mr. Bradford's tasteful little curricle, the rider can sit at ease as carelessly as in a carriage, giving himself up wholly to the exhilaration of the rapid movement, and the pleasurable exercise of the muscles, which is just enough to make the machine skim over the ground, and give an enjoyable sense of power. The increase of friction, which would naturally result from the additional number of wheels, is prevented by an application of anti-friction rollers, which reduce the labor of propelling the machine to a minimum, a requisite of the highest importance to a person seeking either recreation or utility.
Belden, 30 H.P
Belden, 30 H.P. Belden Auto Co., Pittsburgh, Pa. PRICE: $4,500 BODY: Side entrance tonneau SEATS: 7 persons WEIGHT: 2,450 pounds WHEEL-BASE: 124 inches TREAD: 56 inches TIRES, FRONT: 36 × 3½ inches TIRES, REAR: 36 × 4½ inches STEERING: Worm and sector BRAKES: Two on rear hubs SPRINGS: Semi-elliptical front; platform rear FRAME: Pressed steel BORE: 5⅛ in.; STROKE: 5½ in. CYLINDERS: 4 vertical, in front VALVE ARRANGEMENT: Mechanical intake and exhaust MOTOR SUSPENSION: From side members of frame COOLING: Water; cellular radiator IGNITION: Jump spark CURRENT SUPPLY: Magneto and battery CARBURETER: Automatic LUBRICATION: Force feed MOTOR-CONTROL: Spark and throttle CLUTCH: Multiple disc CHANGE GEAR: Belden selective SPEEDS: 3 forward and reverse CHANGE-GEAR CONTROL: Side lever DRIVE: Shaft
10-Passenger Limousine
10-Passenger Limousine. Autocar Equipment Co., Buffalo, N. Y. PRICE: $5,500 BODY: Limousine SEATS: 10 persons inside, 2 outside TREAD: 62½ inches TIRES, FRONT: 36 × 3½ in. TIRES, REAR: 36 × 4 in. STEERING: Irreversible with worm gear BRAKES: On counter shaft, and double-acting on rear hubs SPRINGS: Semi-elliptic FRAME: Oak and steel BORE: 411/16 in. STROKE: 5½ in. CYLINDERS: 4 vertical, separate VALVE ARRANGEMENT: On opposite sides COOLING: Water, cellular radiator IGNITION: Jump spark CURRENT SUPPLY: Batteries CARBURETER: Float-feed automatic LUBRICATION: Force feed MOTOR-CONTROL: Spark and throttle CLUTCH: Conical type CHANGE GEAR: Sliding type SPEEDS: 3 forward and reverse CHANGE-GEAR CONTROL: Side lever DRIVE: Double chain