- Holding the bow
- Position of the left hand and the left arm
The violin is held with the left hand and rests on the left collar bone. The instrument must be horizontal. To give a firm grip, a small pad is often placed between the violin and the left shoulder. A chin-rest screwed to the ribs, and covering a part of the upper table, is also to be recommended. The chin-rest serves also to protect the varnish. To prove that the violin is held securely and well, the left hand may be removed. - Constituent parts of the violin - Exterior
The most important part is the upper table or belly (a). The other parts are the ribs or sides (b), the back (c), the neck (d), the head comprising the scroll and peg box (e), the pegs (f), the finger board (g), the bridge (h), the tailpiece (i), the button[3] (k), the nut (l), and the f or sound-holes (m). The interior of the violin contains the soundpost and the bass bar. - Rabab
. Rabab—Arabian bowed instrument (of Persian origin). Pictures of Indian and Persian bowed instruments exist, but the period when they were employed is not exactly known. - Raba—Indian violin
Pictures of Indian and Persian bowed instruments exist, but the period when they were employed is not exactly known. - Constituent parts of the bow
- Constituent parts of the violin - Interior
- The bow
This received its name from its ancient form, which has undergone many alterations before the present form was arrived at - Harp
- Action of the Square Piano
A. Action Frame. B's Indicate the Cushions, or Bushing, of felt, cloth or leather. C. Balance Rail. D. Balance Pin. Round. E. Mortised Cap for Balance Pin. Bushed. F. Key. G. Lead. H. Back Check. I. Bottom or Key Rocker. J. Bottom Screws; used to regulate height of Jack. K. Jack. L. Jack Spring; concealed under Bottom. M. Center Pin to Jack. N. Hammer Rail. O. Regulating Screw. P. Regulating Button. Q. Flange Rail. R. Flange. Split. S. Flange Rail Screw. T. Flange Screw, to regulate jaws of flange. U. Hammer Butt. V. Center Pin. W. Hammer Stem or Shank. X. Hammer Head. Y. Hammer Felt. Treble hammers sometimes capped with buckskin in old instruments. - Action of the Grand Piano
1. Indicates the felt, cloth or leather, upon which the various parts of the action rest, or fall noiselessly. 2. Key. 3. Bottom; sometimes called Key Rocker. 4. Extension; split at lower end to receive center pin in Bottom. 5. Wippen Support. 6. Jack. 7. Jack Spring. 8. Flange and Regulating Rail. 9. Regulating Screw, Button and Cushion. 10. Escapement Lever. 11. Regulating Screw in Hammer Flange, for Escapement Lever. 12. Check Wire, for Escapement Lever. 13. Screw to regulate fall of Escapement Lever. 14. Lever Flange, screwed to Flange Rail. 15. Hammer Shank. 16. Hammer. 17. Back Check. 18. Damper Lever, leaded. 19. Damper Wire, screwed into upright. 20. Damper Wire Guide, fastened to Sound-Board. 21. Damper Head and Felt. 0. Center Pins. Holes lined with Bushing Cloth. - Upright Piano Action
Ky, is the Key in its resting position. c, wherever found, represents a cushion of felt or soft leather upon which the different parts of the action rest or come in contact with each other. Their purpose, as is readily seen, is that of rendering the action noiseless and easy of operation. Bnc R, shows the end of the balance rail, extending the entire length of the keyboard. B P, is the balance pin. This is a perfectly round pin driven firmly in the balance rail. The bottom of the hole in the key fits closely around the balance pin; at the top, it is the shape of a mortise, parallel with the key, which allows the key to move only in the direction intended. The mortise in the wooden cap on top of the key at this point is lined with bushing cloth which holds the key in position laterally, and prevents looseness and rattling, yet allows the key to move easily. - Piano
- Cornemuse, Calabrian Bagpipe, Musette
The Calabrian Bagpipe or Zampogna is a rudely carved instrument of the eighteenth century. It has four drones attached to one stock, hanging downwards from the end of the bag: two of them are furnished with finger-holes. The reeds are double like those of the oboe and bassoon. The bag is large; it is inflated by the mouth and pressed by the left arm against the chest of the performer. The Zampogna is chiefly used as an accompaniment to a small reed melody pipe called by the same name, and played by another performer. The quality of the tone produced is not unpleasing. It has five holes only, and consequently the seventh of the scale is absent, but this can be easily got by octaving the open note of the pipe and covering part of the lower opening of the chanter with the little finger. The Musette, Zampogna, and Cornemuse here shown are from specimens belonging to Messrs. J. & R. Glen, Edinburgh. - Queen Mary's Harp
This venerable instrument, the least impaired Gaelic Harp existing, is known as Queen Mary's Harp. It is small, being only 31 inches high and 18 inches from back to front. It was played resting upon the left knee and against the left shoulder of the performer, whose left hand touched the upper strings. The comb is from 2½ to 3¼ inches high. It is inserted obliquely in the sound chest, and projects about 14 inches. - Lamont Harp
The extreme length of the Lamont Harp is 38 inches, and the extreme width 18½ inches. The sound chest, as with other ancient harps, is hollowed out of one piece of wood, but the back has been in this instrument renewed, although probably a long time ago. The sound chest is 30 inches long, 4 inches in breadth at the top, and 17 at the bottom. The comb projects 15½ inches. The broken parts of the bow are held together by iron clamps. - Burgmote Horns
Beautiful horns of hammered and embossed bronze belonging to the Corporations of Canterbury and Dover. The right-hand one is from Dover, where it was formerly used for the calling together of the Corporation at the order of the mayor. The minutes of the town proceedings were constantly headed "At a common Horn blowing" (comyne Horne Blowying). This practice continued until the year 1670, and is not yet entirely done away with, as it is still blown on the occasion of certain Municipal ceremonies. The motto on this horn is:— JOHANNES DE · ALLEMAINE · ME · FECIT · preceded by the talismanic letters A·G·L·A, which stand for the Hebrew אַתָּה גִּבּוֹר לְעוֹלָם אֲדֹנָי and mean, "Thou art mighty for ever, O Lord!" The horn, which is 31¾ inches long, with a circumference at the larger end of 15½ inches, is of brass, and is deeply chased with a spiral scrollwork of foliage chiefly on a hatched ground. The inscription is on a band that starts four inches from the mouth and continues spirally. The maker's name is now nearly effaced, but the inscription shows that he was a German, and the date is assigned to the thirteenth century. - Jewish Shophar
The Jewish Shophar, a simple ram's horn, a woodcut of which, drawn from an interesting example preserved at the great Synagogue, Aldgate, London, figures at the end of this Introduction, is the oldest wind instrument in present use in the world. It is first named in the Bible as sounding when the Lord descended upon Mount Sinai, and there seems to be little doubt that it has been continuously used in the Mosaic Service from the time it was established until now. It is sounded in the synagogues at the New Year and on the Fast of the Day of Atonement. The Talmud gives ten reasons for sounding the Shophar at the New Year, which may be summed up as reminding those who hear it of the Creation, Penitence, and the Law, of the Prophets, who were as watchmen blowing trumpets, of the Temple and the Binding of Isaac, of Humility, the gathering together of Israel, the Resurrection, and the day of Judgment, when the trumpet shall sound for all. The embouchure of the Shophar is very difficult, and but three proper tones are usually obtained from it, although in some instances-xiii- higher notes can be got. The short rhythmic flourishes are common, with unimportant differences, to both the German and Portuguese Jews, and consequently date from before their separation. - Modern method og grand pianoforte case construction
A. Continuous bent rim. B. Wooden struts. C. Iron shoe holding struts and connecting with iron plate. D. Main beam. - Back view of upright pianoforte
Back view of upright pianoforte, Knabe patents, showing ribbing of sound-board and construction of back framing. - Jonas Chickering’s full solid cast grand metal plate
- Arrangement of iron plate, braces and scale of parlor size grand pianoforte
- Iron plate for upright pianoforte fitted with Capo D’astro bar
- Sketch of iron plate for concert grand
Sketch of iron plate for concert grand, showing general arrangement of braces, belly-bridges and system of bolts for fastening to case. A—B. Hammer line. 1. Body of plate. 2. Bass bridge. 3. Continuous treble bridge. 4. Agraffes. 5. Capo d’astro bar. Plate is cast in one piece and scale is overstrung. - Cristofori’s action in its final form
1. Key. 2. Jack. 3. Jack-operating spring. 4. Cushion limiting rebound of jack. 5. Under-hammer. 6. Hammer-butt. 7. Hinge of hammer-butt. 8. Hammer-shank. 9. Hammer head. 10. Check. 11. Damper-lifter. 12. Damper-head. 13. Action-beam. 14. Wrest-plank. 15. Tuning pins. 16. Bearing-bridge. 17. String. - Iron plate for upright pianoforte with Agraffes (Mehlin patents)
- Action by Andreas and Nanette (Stein), Streicher Viennese escapement (1794)
1. Key. 2. Jack. 3. Jack-operating spring. 4. Cushion limiting rebound of jack. 5. Button and screw regulating escapement of hammer. 6. Hammer-butt and operating face. 7. Hammer-butt pivot. 8. Hammer-shank. 9. Hammer-head. 10. Check. 11. Damper-lifter. 12. Damper-head. 13. Action-rails. - English direct lever grand action, developed by Broadwood from Backers (1884)
1. Key. 2. Jack. 3. Jack operating spring. 4. Rail and cushion limiting travel of jack. 5. Button and screw regulating escapement of hammer. 6. Hammer-butt with operating notch. 7. Hammer-butt flange. 8. Hammer-shank. 9. Hammer-head. 10. Check. 13. Action-rails. - Double repetition action of Sebastian Erard as used by S. & P. Erard, Paris
1. Key. 2. Wippen. 3. Jack. 4. Escapement lever. 5. Hammer-shank. 6. Roller. 7. Hammer-head. 8. Jack regulating button. 9. Regulating button to limit rise of escapement lever. 10. Hammer-butt. 11. Check. 12. Felt cushion to engage with check. 13. Sticker connecting key and wippen. 14. Action-rails. 15. Damper-head. 16. Damper operating device. 17. Device to limit travel of jack. 18. String. 19. Spring (v-shaped) for escapement lever and jack. - The Erard grand action modified by Herz
1. Key. 2. Wippen. 3. Jack. 4. Escapement lever. 5. Hammer-shank. 6. Hammer-butt notch. 7. Hammer-head. 8. Jack regulating button. 9. Regulating button to limit rise of escapement lever. 10. Hammer-butt. 11. Check. 12. Molded tail of hammer-head to engage with check. 13. Capstan-screw connecting key and wippen. 14. Action-rails. 15. Damper-head. 16. Damper-operating device. 17. Device to limit travel of jack. 18. Regulating device for escapement lever. 19. Springs (2) for escapement lever and jack. 20. String. 21. Flange. - Grand pianoforte action with metallic action and damper frames
Grand pianoforte action with metallic action and damper frames, sostenuto pedal device and hammer swinging soft pedal attachment. 22. Sostenuto pedal-rod. 23. Attachment to damper-lever engaging with sostenuto pedal-rod. 24. Metallic action and damper-brackets. 25. Hammer swing-rail and cushion. 26. Hammer swing-rail rod. 27. Hammer swing-rail lifter. 28. Lifter-rod. 29. Lost motion compensating levers. 30. Lost motion compensating levers. - Standard modern American grand action
1. Key. 2. Wippen. 3. Jack. 4. Escapement lever. 5. Hammer-shank. 6. Roller. 7. Hammer-head. 8. Jack-regulating button. 9. Regulating button to limit rise of escapement lever. 10. Hammer-butt. 11. Check. 12. Molded tail of hammer-head to engage with check. 13. Key-rocker and sticker connecting wippen and key. 14. Action-rails. 15. Damper-head. 16. Damper operating device. 17. Device to limit travel of jack. 18. Regulating device for escapement lever. 19. Separate springs for jack and escapement lever. 20. String. 21. Flanges. - Standard American upright action
1. Key-rocker. 2. Abstract. 3. Abstract-lever. 4. Flange. 5. Action-rail. 6. Wippen. 7. Jack. 8. Jack-spring. 9. Check. 10. Check-wire. 11. Bridle-wire. 12. Tip of bridle-tape. 13. Bridle-tape. 14. Back-stop. 15. Regulating rail. 16. Regulating button. 17. Regulating screw. 18. Hammer-butt. 19. Hammer-shank. 20. Hammer-molding. 21. Hammer-head. 22. Hammer-rail. 23. Hammer-butt spring. 24. Hammer-spring rail. 25. Damper-spoon. 26. Damper-lifting rod. 27. Damper-lever. 28. Damper-lever spring. 29. Damper-wire. 30. Damper-block. 31. Damper-head. 32. String. 33. Continuous brass hammer-butt flange. - Upright action showing lost-motion device
Upright action showing lost-motion device, metallic regulating rail support, capstan screw, jack regulating rail and metallic action brackets. 34. Hammer-rail lifter-wire. 35. Hammer-rail swing-lever. 36. Hammer-rail lifter rod. 37. Lifter-rod lever. 38. Compensation-lever. 39. Capstan-screw. 40. Rail for limiting return movement of jack. 41. Metallic regulating rail support. - Saw Ou
The Saw Ou, or Chinese fiddle, used in Siam, is suggestive of a modern croquet mallet, with pegs stuck in the handle, and has only two strings, fastened from the pegs to the head. It is played with a bow which the performer cleverly inserts between the strings. - Ta'khay, or Alligator
A very curious instrument is known as the Ta'khay, or Alligator: a glance at its form will readily account for its name. There seems a sort of satire in making one of the most silent of savage monsters a medium for the conveyance of sweet sounds. The Ta'khay is a stringed instrument of considerable power, and in tone is not unlike a violoncello. The three strings pass over eleven frets or wide movable bridges, and the shape of the body is rather like that of a guitar. It is placed on the ground, raised on low feet, and the player squats beside it. The strings are sounded by a plectrum, or plucker, shaped like an ivory tooth, fastened to the fingers, and drawn backwards and forwards so rapidly that it produces an almost continuous sweet dreamy sound. - Saw Tai
The Saw Tai is the real Siamese violin, and is frequently of most elaborate construction. The upper neck of the one shown in the illustration is of gold, beautifully enamelled, while the lower neck is of ivory, richly carved. The back of the instrument is made of cocoa-nut shell, ornamented with jewels. The membrane stretched on the sounding-board, which gives the effect of a pair of bellows, is made of parchment, and has often, as in this special instrument, a jewelled ornament inserted in one corner. The Saw Tai has three strings of silk cord, which, passing over a bridge on the sounding-board, run up to the neck, being bound tightly to it below the pegs. The player sitting cross-legged on the ground holds the fiddle in a sloping posture, and touches the strings with a curiously curved bow. - Guatemalan Marimba
Another form of Marimba is popular amongst the natives of Guatemala, in Central America. Its construction is much that of a rough table, the top being formed of twenty-eight wooden bars or keys, from each of which hangs a hollow piece of wood, varying in size; these take the place of the resonating shells of the Zulu Marimba. The instrument is usually about six and a half feet long, by two and a half wide, and the keys are struck by hammers topped with rubber. Three performers often play together with great skill. This form of Marimba is also met with amongst the natives of Costa Rica. - Zulu Marimba
The Zulus, or more correctly the Amazulus, take the front `rank` amongst the native tribes of the African continent. Their code of laws, military arrangements, and orderly settlements resemble those of civilised nations at many points. Their dances are a national feature, and a great company of young warriors performing a solemn war dance is a most impressive sight. One of their chief instruments is the 'Marimba' or 'Tyanbilo,' a form of harmonium. The keys are bars of wood called Intyari, of graduated size. These are suspended by strings from a light wooden frame, either resting on the ground, or hung round the neck of the player. Between every two keys is a wooden bar crossing the centre bar to which the keys are attached. On each key two shells of the fruit known as the Strychnos McKenzie, or Kaffir Orange, are placed as resonators, one large and one small. The use of resonators is to increase and deepen the sound. The Marimba is played with drum-sticks of rubber, and the tone is good and powerful. - The Burmese Soung
The harp (the Soung) shown in the illustration is a favourite Burmese instrument, and is chiefly used to accompany the voice: it is always played by young men. It also has thirteen strings, made of silk, and is tuned by the strings being pushed up or down on the handle. It would sound strange to our ears, as the Burmese scale is differently constructed from ours. Every learner of music knows, or ought to know, that our scale has the semi-tones between the third and fourth, and the seventh and eighth notes, which gives a smooth progression satisfactory to our ears; but the Burmese scale places the semi-tones between the second and third and the fifth and sixth, which is quite different and to us has not nearly such a pleasant effect. The Soung is held with the handle resting on the left arm of the performer, who touches the strings with his right hand. - The 'Tse King.'
Another curious Chinese instrument is the 'ou,' which is made of wood, and fashioned like a crouching tiger. It is hollow, and along its back run metal teeth, which are played with a small stick or brush. The 'ou' stands on a hollow pedestal, also of wood, which serves as a sounding board and increases the tone. See also - Carillon, Netherlands
The idea of forming of a number of bells a musical instrument such as the carillon is said by some to have suggested itself first to the English and Dutch; but what we have seen in Asiatic countries sufficiently refutes this. Moreover, not only the Romans employed variously arranged and attuned bells, but also among the Etruscan antiquities an instrument has been discovered which is constructed of a number of bronze vessels placed in a row on a metal rod. Numerous bells, varying in size and tone, have also been found in Etruscan tombs. Among the later contrivances of this kind in European countries the sets of bells suspended in a wooden frame, which we find in mediæval illuminations, deserve notice. In the British museum is a manuscript of the fourteenth century in which king David is depicted holding in each hand a hammer with which he strikes upon bells of different dimensions, suspended on a wooden stand. - Vielle
The woodcut represents a very beautiful vielle; French, of about 1550, with monograms of Henry II. This is at South Kensington. The contrivance of placing a string or two at the side of the finger-board is evidently very old, and was also gradually adopted on other instruments of the violin class of a somewhat later period than that of the vielle; for instance, on the lira di braccio of the Italians. It was likewise adopted on the lute, to obtain a fuller power in the bass; and hence arose the theorbo, the archlute, and other varieties of the old lute. - The minstrels’ gallery, at Exeter cathedral
The minstrels’ gallery of Exeter cathedral dates from the fourteenth century. The front is divided into twelve niches, each of which contains a winged figure or an angel playing on an instrument of music. The instruments are so much dilapidated that some of them cannot be clearly recognized; but, as far as may be ascertained, they appear to be as follows:—1. The cittern. 2. The bagpipe. 3. The clarion, a small trumpet having a shrill sound. 4. The rebec. 5. The psaltery. 6. The syrinx. 7. The sackbut. 8. The regals. 9. The gittern, a small guitar strung with catgut. 10. The shalm. 11. The timbrel; resembling our present tambourine, with a double row of gingles. 12. Cymbals. The shalm, or shawm, was a pipe with a reed in the mouth-hole. The wait was an English wind instrument of the same construction. If it differed in any respect from the shalm, the difference consisted probably in the size only. The wait obtained its name from being used principally by watchmen, or waights, to proclaim the time of night. Such were the poor ancestors of our fine oboe and clarinet. - Scotch bagpipe, eighteenth century
The bagpipe appears to have been from time immemorial a special favourite instrument with the Celtic races; but it was perhaps quite as much admired by the Slavonic nations. In Poland, and in the Ukraine, it used to be made of the whole skin of the goat in which the shape of the animal, whenever the bagpipe was expanded with air, appeared fully retained, exhibiting even the head with the horns; hence the bagpipe was called kosa, which signifies a goat. The woodcut represents a Scotch bagpipe of the eighteenth century. - Regal
Of the little portable organ, known as the regal or regals, often tastefully shaped and embellished, some interesting sculptured representations are still extant in the old ecclesiastical edifices of England and Scotland. There is, for instance, in Beverley minster a figure of a man playing on a single regal, or a regal provided with only one set of pipes; and in Melrose abbey the figure of an angel holding in his arms a double regal, the pipes of which are in two sets. The regal generally had keys like those of the organ but smaller. A painting in the national Gallery, by Melozzo da Forli who lived in the fifteenth century, contains a regal which has keys of a peculiar shape, rather resembling the pistons of certain brass instruments. The illustration has been drawn from that painting. To avoid misapprehension, it is necessary to mention that the name regal (or regals, rigols) was also applied to an instrument of percussion with sonorous slabs of wood. - Recorder
That there was, in the time of Shakespeare, a musical instrument called recorder is undoubtedly known to most readers from the stage direction in Hamlet: Re-enter players with recorders. But not many are likely to have ever seen a recorder, as it has now become very scarce: we therefore give an illustration of this old instrument, which is copied from “The Genteel Companion; Being exact Directions for the Recorder: etc.” London, 1683. - Pneumatic organ, fourth century
The pneumatic organ is sculptured on an obelisk which was erected in Constantinople under Theodosius the great, towards the end of the fourth century. The bellows were pressed by men standing on them: see page 103. This interesting monument also exhibits performers on the double flute. The hydraulic organ, which is recorded to have been already known about two hundred years before the Christian era, was according to some statements occasionally employed in churches during the earlier centuries of the middle ages. Probably it was more frequently heard in secular entertainments for which it was more suitable; and at the beginning of the fourteenth century appears to have been entirely supplanted by the pneumatic organ. The earliest organs had only about a dozen pipes. - Monochord
The monochord was mounted with a single string stretched over two bridges which were fixed on an oblong box. The string could be tightened or slackened by means of a turning screw inserted into one end of the box. The intervals of the scale were marked on the side, and were regulated by a sort of movable bridge placed beneath the string when required. As might be expected, the monochord was chiefly used by theorists; for any musical performance it was but little suitable. About a thousand years ago when this monochord was in use the musical scale was diatonic, with the exception of the interval of the seventh, which was chromatic inasmuch as both b-flat and b-natural formed part of the scale. The notation on the preceding page exhibits the compass as well as the order of intervals adhered to about the tenth century. - Lute, Elizabethan
Lute, Elizabethan The lute was made of various sizes according to the purpose for which it was intended in performance. The treble-lute was of the smallest dimensions, and the bass-lute of the largest. The theorbo, or double-necked lute which appears to have come into use during the sixteenth century, had in addition to the strings situated over the finger-board a number of others running at the left side of the finger-board which could not be shortened by the fingers, and which produced the bass tones. The largest kinds of theorbo were the archlute and the chitarrone. - Irish bagpipe, sixteenth century
The bagpipe is of high antiquity in Ireland, and is alluded to in Irish poetry and prose said to date from the tenth century. A pig gravely engaged in playing the bagpipe is represented in an illuminated Irish manuscript, of the year 1300: and we give a copy of a woodcut from “The Image of Ireland,” a book printed in London in 1581. - Viola da gamba
The player on the viola da gamba, shown in the engraving, is a reduced copy of an illustration in “The Division Violist,” London, 1659. It shows exactly how the frets were regulated, and how the bow was held. The most popular instruments played with a bow, at that time, were the treble-viol, the tenor-viol, and the bass-viol. It was usual for viol players to have “a chest of viols,” a case containing four or more viols, of different sizes. Thus, Thomas Mace in his directions for the use of the viol, “Musick’s Monument” 1676, remarks, “Your best provision, and most complete, will be a good chest of viols, six in number, viz., two basses, two tenors, and two trebles, all truly and proportionably suited.” The violist, to be properly furnished with his requirements, had therefore 119to supply himself with a larger stock of instruments than the violinist of the present day. - Syrinx
Of the syrinx there are extant some illustrations of the ninth and tenth centuries, which exhibit the instrument with a number of tubes tied together, just like the Pandean pipe still in use. In one specimen engraved from a manuscript of the eleventh century the tubes were inserted into a bowl-shaped box. This is probably the frestele, fretel, or fretiau, which in the twelfth and thirteenth centuries was in favour with the French ménétriers. - Organistrum
The construction of the organistrum requires but little explanation. A glance at the finger-board reveals at once that the different tones were obtained by raising the keys placed on the neck under the strings, and that the keys were raised by means of the handles at the side of the neck. Of the two bridges shown on the body, the one situated nearest the middle was formed by a wheel in the inside, which projected through the sound-board. The wheel which slightly touched the strings vibrated them by friction when turned by the handle at the end. The order of intervals was c, d, e, f, g, a, b-flat, b-natural, c, and were obtainable on the highest string. There is reason to suppose that the other two strings were generally tuned a fifth and an octave below the highest. The organistrum may be regarded as the predecessor of the hurdy-gurdy, and was a rather cumbrous contrivance. Two persons seem to have been required to sound it, one to turn the handle and the other to manage the keys. Thus it is generally represented in mediæval concerts. - German fiddle, ninth century
A German fiddle of the ninth century, called lyra, copied by Gerbert from the manuscript of St. Blasius, has only one string. - Anglo-saxon fiddle
An interesting drawing of an Anglo-saxon fiddle—or fithele, as it was called—is given in a manuscript of the eleventh century in the British museum (Cotton, Tiberius, c. 6). The instrument is of a pear shape, with four strings, and the bridge is not indicated. - The French Crout
Copy of an illumination from a manuscript in the Bibliothèque royale at Paris of the eleventh century. The player wears a crown on his head; and in the original some musicians placed at his side are performing on the psalterium and other instruments. These last are figured with uncovered heads; whence M. de Coussemaker concludes that the crout was considered 95by the artist who drew the figures as the noblest instrument. It was probably identical with the rotta of the same century on the continent. - The old English 'crowd'
A player on the crwth or crowd (a crowder) from a bas-relief on the under part of the seats of the choir in Worcester cathedral dates from the twelfth or thirteenth century