- A deckload of cotton
A deckload of cotton - A Corvette of 1780
This ship shows the new sail plan overcoming the old. The masts carry topsails, topgallantsails, and royals, and what was formerly a lateen sail on the mizzenmast has become a spanker. Furthermore, while the ship carries jibs, she has not yet parted with her spritsails. - A Chinese sedan chair and bearers
A Chinese sedan chair and bearers - A Cargo Liner
A cargo liner is a freight ship that sails on scheduled dates and routes, and is different in this from a “tramp” which takes what cargoes it can at any time and to any port. - A British Line-of-Battle Ship, 1790
This awkward ship is one of the type that made up the great fleets that fought, for instance, at Trafalgar. Nelson’s flagship, the Victory, is of this type. - A British East Indiaman
These merchant ships, which sailed from England to the Far East, were almost as much like warships as they were like merchantmen. They were finely built, but they took their time on their voyages out and back. - A Bleriot Sea-plane
England, in the building and handling of sea-planes has come well to the fore, and our machines are more advanced than those of other countries. The Admiralty has recognised that, acting as a coastal scout in time of war, such craft would be of the utmost value; thus we find air-stations dotted round our seaboard, from which machines may fly in a regular patrol. By the employment of hundreds of craft, operating upon a well-ordered plan, it will be possible in the future to girdle our shores completely; and such machines would not only spy out the approach of an enemy’s fleet, but give battle to hostile aeroplanes or airships which might seek to pass inland. The type of machine we have just described was a biplane, but there are monoplane sea-craft, and a Bleriot fitted for alighting upon the water is shown. - A Black Ball Packet
Ships of this type carried the transatlantic passengers of the early part of the 19th Century. Because of the demand of the owners of the Black Ball Line and of its competitors, America, where these lines were owned and where their ships were built, developed the designers who ultimately gave the world the clipper ships. - A Birch-bark Canoe
In many parts of the world savage people have learned to build light frames over which they have stretched the best material available to them. The Indians of North America commonly utilize birch bark. - A Battle Cruiser
A ship carrying the heaviest of guns but lacking the heavy armour of the dreadnaughts. Its speed is greatly superior to that of dreadnaughts. - A 16th-Century Dutch Boat
It was on boats of this type that the jib seems first to have been used. To-day in Holland one sees a similar boat, called a schuyl, which is almost identical with this, except that it utilizes a curved gaff at the top of the mainsail. - A 13th-Century English Ship
The Viking influence is still easily traceable in this ship, but the forecastle and the sterncastle have put in their appearance. Also the hull is heavier than and not so sharp as in the earlier Viking ships. - A 'Fischer' Combination Omnibus
- 4-Cylinder vertical engine assembly
4-Cylinder vertical engine assembly - 4-Cylinder vertical engine assembly
4-Cylinder vertical engine assembly - 1910 New Engines
- 1910 Curtis
- 10-Passenger Limousine
10-Passenger Limousine. Autocar Equipment Co., Buffalo, N. Y. PRICE: $5,500 BODY: Limousine SEATS: 10 persons inside, 2 outside TREAD: 62½ inches TIRES, FRONT: 36 × 3½ in. TIRES, REAR: 36 × 4 in. STEERING: Irreversible with worm gear BRAKES: On counter shaft, and double-acting on rear hubs SPRINGS: Semi-elliptic FRAME: Oak and steel BORE: 411/16 in. STROKE: 5½ in. CYLINDERS: 4 vertical, separate VALVE ARRANGEMENT: On opposite sides COOLING: Water, cellular radiator IGNITION: Jump spark CURRENT SUPPLY: Batteries CARBURETER: Float-feed automatic LUBRICATION: Force feed MOTOR-CONTROL: Spark and throttle CLUTCH: Conical type CHANGE GEAR: Sliding type SPEEDS: 3 forward and reverse CHANGE-GEAR CONTROL: Side lever DRIVE: Double chain - 'Wilhelm Kaiser' On The Rhine, 1886
The Rhine steamers and those plying on the Swiss lakes are in keeping with the picturesque scenery through which they run. Painted in bright colours, they present a very attractive and smart appearance. They are kept scrupulously clean and are admirably managed. Many of them are large, with saloon cabins the whole length of the vessel, over which is the promenade deck covered with gay awnings. They run fast. The captain sits in state in his easy chair under a canopy on the bridge—smoking his cigar. The chief steward, next to the captain by far the most important personage on board, moves about all day long in full evening dress—his main concern being to know what wine you will have for lunch or dinner that he may put it on ice for you. The table d’hote is the crowning event of the day on board a Rhine steamer, i.e., for the misguided majority of tourists to whom a swell dinner offers greater attractions than the finest scenery imaginable. - 'Great Republic'
Last of the Clipper Passenger Packets, 1854. The clipper “packet ship” was a vast improvement on the ordinary sailing ship. It had just reached its highest point of development when the ocean steamship first made its appearance. It was to the upper strata of the travelling community, sixty years ago, the counterpart of the express steamer of to-day. The packet-ship was built for fast sailing, with very fine lines, was handsomely fitted up and furnished, was exceedingly well found in eatables and drinkables, and carried a great spread of canvas. To see one of these ships under full sail was a [Pg 27]sight to be remembered—a rare sight, inasmuch as all the conditions of wind and water necessary for the display of every stitch of canvas are seldom met with in the North Atlantic. They not unfrequently crossed in fourteen or fifteen days. In winter they might be three months on a single voyage, but their average would be from twenty-five to thirty days. - 'Bone-shaker' bicycle, 1869
In 1839 Kirkpatrick Macmillan, a blacksmith of Courthill, Dumfriesshire, fitted pedals and cranks to the rear wheel, but again the machine was a failure. About 1864 Pierre Lallement, of Paris, adopted a front-wheel drive by fitting cranks and pedals, and, strange to say, this ‘bone-shaker,' as it was called, became the first popular bicycle The back-bone was of solid iron, and the wooden wheels had iron tires. It was introduced into England in 1868, and large numbers were made and used. In 1869 wire-spoked wheels were introduced by E.A.Cowper, and in the following year solid rubber tyres,and ball bearings in 1878.